A 7-core erbium doped double-clad fiber amplifier with side-coupled pumping

Kazi Abedin,John Fini,Taunay Thierry,Benyuan Zhu,Man Yan,Lalit Bansal,Frank Dimarcello,Eric Monberg,David DiGiovanni

DOI: https://doi.org/10.48550/arXiv.1309.5664

2013-09-23

Abstract:We demonstrate a 7-core erbium doped fiber amplifier employing side pumping using tapered multimode fiber. The amplifier has multicore inputs and outputs which can be readily spliced to multicore transmission fiber for amplifying space division multiplexed signals. Gain over 25dB was obtained in each of the cores over a 40-nm bandwidth covering C-band.

Optics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to effectively amplify the signals in multi - core fibers in a Space Division Multiplexing (SDM) system. Specifically, the authors present a 7 - core erbium - doped double - clad fiber amplifier that adopts side - coupling pumping technology. Through this design, the amplifier can simultaneously amplify the signals in multiple spatial channels, which is crucial for increasing the transmission capacity of optical communication systems.

### Main problems solved:
1. **Efficient amplification of multi - core fiber signals**: To overcome the losses in SDM transmission systems, a suitable amplifier that can simultaneously amplify the signals of all SDM channels is required. This paper proposes a 7 - core erbium - doped fiber amplifier to achieve efficient signal amplification through side - coupling pumping technology.

2. **Design of multi - core input and output**: Traditional multi - core amplifiers usually require complex coupling structures, while the amplifier proposed in this paper has multi - core input and output, which can be easily connected to multi - core transmission fibers, thus simplifying the amplifier design and reducing the cost.

3. **Broad - band high gain**: The research shows that within the C - band (approximately 1530 nm to 1565 nm), the gain of each core exceeds 25 dB and the bandwidth is approximately 40 nm. This indicates that the amplifier has good performance in a broad - band range.

### Technical details:
- **Side - coupling pumping**: A tapered multi - mode fiber is used to couple the pump light from the side into the double - clad gain fiber. This method avoids interfering with the core waveguide and improves the pumping efficiency.
- **Multi - core structure**: The gain fiber contains 7 identical cores, arranged in a hexagonal array, with a core spacing of approximately 41 μm, a core diameter of 3.2 μm, and a numerical aperture of 0.23.
- **Pumping efficiency**: By optimizing the design of the tapered multi - mode fiber, a pumping coupling efficiency of approximately 67% is achieved.
- **Noise characteristics**: Through numerical simulation and experimental measurement, the gain and noise characteristics of the amplifier are studied. The results show that the internal noise factor at 1560 nm is approximately 5 dB.

In conclusion, through the design and implementation of a 7 - core erbium - doped fiber amplifier with side - coupling pumping, this paper solves the key problems in multi - core fiber signal amplification and provides important technical support for the practical application of SDM systems.