Abstract:The production of advanced biofuels represents a near-term opportunity to decarbonize the heavy vehicle transportation sector. However, important barriers must be overcome and successful deployment of these technologies will require (i) catalyst and process development to reduce cost and improve carbon utilization and (ii) industry-relevant validation of operability to de-risk scale-up. Herein, we seek to address these challenges for an integrated two-step process involving catalytic fast pyrolysis (CFP) followed by co-hydrotreating of bio-oil with refinery streams. Technoeconomic and lifecycle analysis based on the data presented herein reveal the potential to generate low-carbon transportation fuels and chemical co-products with a modelled selling price of ) and a 78% reduction in greenhouse gas emissions compared to fossil-based pathways. The feedstock for this research was a blend of 50 wt% loblolly pine and 50 wt% waste forest residues, and the CFP step was performed using an ex situ fixed bed of Pt/TiO 2 with co-fed H 2 at atmospheric pressure. Compared to previous state-of-technology benchmarks, advancements in catalyst design and synthesis methodology enabled a 4x reduction in Pt loading and a 4x increase in time on stream without negatively impacting upgrading performance. Additionally, a first-of-its-kind integrated assessment of waste gas adsorption showed near quantitative recovery of acetone and 2-butanone, which collectively represent approximately 5% of the biomass carbon. The valorization of these co-products opens opportunities to support decarbonization of the chemical sector while simultaneously improving the overall process carbon efficiency to > 40%. After condensation, the CFP-oil was co-hydrotreated with straight run diesel (10:90 vol%) to achieve 95% biogenic carbon incorporation. The oxygen content of the hydrotreated oil was below detection limits, and the diesel fraction exhibited a cetane number and cloud point suitable for a finished fuel. This manuscript concludes by highlighting remaining research needs associated with improving thermal management during catalyst regeneration, mitigating catalyst deactivation due to inorganic deposition, and demonstrating durability of biomass feeding systems when operated in hydrogen-rich environments.

Hydroprocessing characteristics of palm fatty acid distillate in palm oil into low-carbon biofuel

Hydrodecarboxylation of fatty acids into liquid hydrocarbons over a commercial Ru/C catalyst under mild conditions

Dilemma and Strategies for Production of Diesel-Like Hydrocarbons by Deoxygenation of Biomass-Derived Fatty Acids

Direct Production of Aviation Fuel Range Hydrocarbons and Aromatics from Oleic Acid Without an Added Hydrogen Donor

Co-hydrotreating of Used Engine Oil and the Low-Boiling Fraction of Bio-Oil Blends for the Production of Liquid Fuel

Hydroprocessing of Lipids: an Effective Production Process for Sustainable Aviation Fuel

Integration of catalytic fast pyrolysis and hydroprocessing: a pathway to refinery intermediates and “drop-in” fuels from biomass

Glycerol Esterification of Free Fatty Acids Catalyzed by Zinc Glycerolate for Biodiesel Production from Acidified Palm Oil: Optimization, Kinetic Study, and Process Evaluation

Methyl ester production process from palm fatty acid distillate using hydrodynamic cavitation reactors in series with solid acid catalyst

Single-step catalytic deoxygenation of palm feedstocks for the production of sustainable bio-jet fuel

Fe-Assisted Hydrothermal Liquefaction of Lignocellulosic Biomass for Producing High-Grade Bio-Oil

Customized Atmospheric Catalytic Hydropyrolysis of Biomass to High-Quality Bio-Oil Suitable for Coprocessing in Refining Units

Cooperative Catalytic Transfer for One-Pot Hydrolysis/Hydrogenation of Refined Palm Oil Using Formic Acid as a Hydrogen Source

Porous Biochar Supported Transition Metal Phosphide Catalysts for Hydrocracking of Palm Oil to Bio-Jet Fuel

Advancements and challenges in the production of low-carbon fuels via catalytic fast pyrolysis of biomass through refinery integration and co-product generation

Hydrogen-free deoxygenation of oleic acid on acidic and basic ZSM-5 and Y-zeolites: products for biofuel and reaction pathways

Conversion of palm fatty acid distillate to bio-jet fuel-range hydrocarbons over bimetallic NiCo/SBA-15-NH 2 catalyst

Second-generation hydrocarbon fuels from oil palm by-products.

A Comprehensive Review of Experimental Parameters in Bio-oil Upgrading from Pyrolysis of Biomass to Biofuel Through Catalytic Hydrodeoxygenation

One-step hydrogenation-esterification of furfural and acetic acid over bifunctional Pd catalysts for bio-oil upgrading.

Valorization of Palm Biomass Waste for Sustainable Production of Lipase-Carbon Matrices And Biodiesel