Abstract:The primary mirror hydromantic position control system requires multi-motors and hydromantic components are controlled synchronously, and the control forces of different motors are changed with the position of primary mirror changing. At the same time, the control system also be required to support the mirror weight. According to the requirement of the hydromantic position control system of the large telescope. This paper provides a high integrated level control system based on open embedded controller and Ether cat technology, in order to control five different hydromantic Oil Volume Adjustment Component(OVAc)which is driven by five linear Actuator, constituting five permanent magnet synchronous motors and Roller screws. The whole control system including correction mode (CM), close-loop control using displacement sensors mode (CLDM), close-loop control using encoder position mode (CLCPM), close-loop control using encoder velocity mode (CLCVM), monitoring mode (MM), and halting mode (HM), in order to satisfy different working requirements. Position control strategy adopts three close-loop structures, including the inner current loop is PI controller with fiction compensation, the speed closed-loop is PI controller with two-order filter and the position closed-loop is P controller with Speed feed forward compensation in order to guarantee the accuracy of control system. Experiments are carried on the OVAC of 4m telescope and hydromantic position control system of 1.23m mirror. The results show that the accuracy of OVAC can achieve 1um when it bears 2700N load which equivalent each OVAC should bear of 4m mirror. At same time, the accuracy of 1.23m mirror at different pitch angle and different velocity can be always controlled less than 4.4um. This control system play an important role in the active optics correction, it can guarantee the image to stabilize one image unit in the field of view, so the control system meets the requirement the image accuracy.

ALMA Nutator Design and Preliminary Performance

An Active Surface Upgrade For The Delingha 13.7-M Radio Telescope

Nano-and Micro-Actuations of Hard Disk’s Head Positioning System: Actuator Design and Evaluation of Performance

In-lab and On-sky Closed-loop Results of Adaptive Secondary Mirrors with TNO's Hybrid Variable Reluctance Actuators

MagAO-X Phase II Upgrades: Implementation and First On-Sky Results of a New Post-AO 1000 Actuator Deformable Mirror

The Actuator Design and the Experimental Tests of a New Technology Large Deformable Mirror for Visible Wavelengths Adaptive Optics

Sensors and Actuators for the Advanced LIGO Mirror Suspensions

First laboratory and on-sky results of an adaptive secondary mirror with TNO-style actuators on the NASA Infrared Telescope Facility

A Precision Cryogenic Positioning Stage for Detector Dithering and Flexure Compensation

ALMA North American Integration Center Front-End Test System

Construction of AC Motor Controllers for NOvA Experiment Upgrades

Towards new servo control algorithms at the TNG telescope

Actuator Development at IAAT for the Cherenkov Telescope Array Medium Size Telescopes

Design And Performance Of An R-Theta Fiber Positioner For The Bigboss Instrument

The Optical and Mechanical Design for the 21,000 Actuator ExAO System for the Giant Magellan Telescope: GMagAO-X

A Novel Nanopositioning Stage Integrated with Voice Coil Motor and Active Eddy Current Damper

Optimizing the Frequency Response of a Steering Mirror Mount for Interferometry Applications

How Do We Design the Interferometric System Focused on the Analog and Digital Backend and the Correlator for Scientifically Valuable ALMA Developments?

Preliminary Control-Oriented Modeling of the ITER Steering Mirror Assembly and Local Control System in the Electron Cyclotron Heating & Current Drive Actuator

Performance of the ALMA Band 10 SIS Receiver Prototype Model

Design and Tests of Muti-motors Hydromantic Position Control System of Primary Mirror Based on Large Telescope