Radio-transparent multi-layer insulation for radiowave receivers

J. Choi,H. Ishitsuka,S. Mima,S. Oguri,K. Takahashi,O. Tajima

DOI: https://doi.org/10.1063/1.4827081

2013-10-18

Abstract:In the field of radiowave detection, enlarging the receiver aperture to enhance the amount of light detected is essential for greater scientific achievements. One challenge in using radio transmittable apertures is keeping the detectors cool. This is because transparency to thermal radiation above the radio frequency range increases the thermal load. A technology that maintains cold conditions while allowing larger apertures has been long-awaited. We propose radio-transparent multi-layer insulation (RT-MLI), composed from a set of stacked insulating layers. The insulator is transparent to radio frequencies, but not transparent to infrared radiation. The basic idea for cooling is similar to conventional multi-layer insulation. It leads to a reduction in thermal radiation while maintaining a uniform surface temperature. The advantage of this technique over other filter types is that no thermal links are required. As insulator material, we used foamed polystyrene; its low index of refraction makes an anti-reflection coating unnecessary. We measured the basic performance of RT-MLI to confirm that thermal loads are lowered with more layers. We also confirmed that our RT-MLI has high transmittance to radiowaves, but blocks infrared radiation. For example, RT-MLI with 12 layers has a transmittance greater than 95% (lower than 1%) below 200 GHz (above 4 THz). We demonstrated its effects in a system with absorptive-type filters, where aperture diameters were 200 mm. Low temperatures were successfully maintained for the filters. We conclude that this technology significantly enhances the cooling of radiowave receivers, and is particularly suitable for large-aperture systems. This technology is expected to be applicable to various fields, including radio astronomy, geo-environmental assessment, and radar systems.

Instrumentation and Methods for Astrophysics,Instrumentation and Detectors

What problem does this paper attempt to address?

The paper attempts to address the issue of how to expand the receiving aperture in a radio wave receiver system while maintaining the detector at a low temperature. Specifically, the paper proposes a multi-layer insulation material (RT-MLI) that is transparent to radio waves but blocks infrared radiation, to reduce the impact of thermal radiation on the detector, thereby achieving a larger receiving aperture and higher scientific achievements.

### Background and Challenges
In the field of radio wave detection, expanding the receiving aperture to enhance the amount of light received is crucial for achieving greater scientific results. However, maintaining the detector at a low temperature when using an aperture transparent to radio waves is a challenge. This is because transparency to thermal radiation (especially thermal radiation above the radio frequency range) increases the thermal load. The traditional solution is to install thermal filters, but these filters are difficult to manufacture and maintain, especially in the case of large diameters.

### Proposed Solution
The paper proposes a technology called "Radio Transparent Multi-Layer Insulation" (RT-MLI). This material consists of multiple stacked insulation layers that are transparent to radio waves but opaque to infrared radiation. Its basic principle is similar to traditional multi-layer insulation technology, which can reduce thermal radiation while maintaining uniform surface temperature. Compared to traditional filters, an important advantage of RT-MLI is that it does not require thermal links, thus not increasing the burden on the cooling system.

### Experimental Verification
Researchers experimentally verified the performance of RT-MLI. They measured the performance of RT-MLI with different numbers of layers in terms of reducing thermal load and transmittance, and applied it to a system containing an absorptive filter. The experimental results show that with the increase in the number of layers, RT-MLI can significantly reduce the thermal load and maintain a low temperature. For example, 12 layers of RT-MLI have a transmittance greater than 95% below 200 GHz, while the transmittance is less than 1% above 4 THz.

### Application Prospects
Researchers believe that RT-MLI technology is particularly suitable for large aperture systems, such as radio astronomy, earth environment assessment, and radar systems. This technology can not only significantly improve the cooling effect of radio wave receivers but also achieve aperture expansion under high transmittance conditions while maintaining uniform surface temperature.

### Conclusion
The paper concludes that RT-MLI is an effective technology that can expand the aperture of radio wave receivers while maintaining low temperatures, thereby improving scientific achievements. This technology has broad application prospects, especially in fields that require large apertures and high sensitivity.