Abstract:Composites of poly(methyl methacrylate) (PMMA) with multi-walled carbon nanotubes (MWCNT) of varying aspect ratio and carboxylic acid functionality were prepared using melt mixing. The extent of dispersion and distribution of the MWCNTs in the PMMA matrix was investigated using a combination of high-resolution transmission electron microscopy (HRTEM), wide-angle X-ray diffraction (XRD) and Raman spectroscopy. The electrical resistivity and oscillatory shear rheological properties of the composites were measured as a function of MWCNT geometry, functionality, and concentration. The fundamental ballistic conductance of the pristine free-standing MWCNTs was investigated using a mechanically controlled break-junction method. The electrical conductivity of PMMA was enhanced by up to 11 orders of magnitude for MWCNT concentrations below 0.5wt.%. MWCNTs having higher aspect ratio, above 500, or functionalized with carboxylic acid groups readily formed rheological percolated networks with thresholds, determined from a power law relationship, of 1.52 and 2.06wt.%, respectively. The onset of pseudo-solid-like behaviour and network formation is observed as G′, η∗, and tanδ−1 are independent of frequency as MWCNT loading increased. Sufficiently long and/or functionalized tubes are required to physically bridge or provide interfacial interactions with PMMA to alter polymer chain dynamics. Carboxylic acid functionalization disrupts the crystalline order of MWCNTs due to a loss of π-conjugation and electron de-localisation of sp2 C–C bonds resulting in non-ballistic electron transport in these tubes, irrespective of how highly dispersed they are in the PMMA matrix.

Fabrication and Characterization of Poly(methyl methacrylate)CaCu3Ti4O12 Composites

Structural, Thermal and Electrical properties of Poly(methyl methacrylate)-CaCu3Ti4O12 composite sheets fabricated via melt mixing

Dielectric properties of Poly(vinylidene fluoride) / CaCu3Ti4O12 composites

Dielectric properties of Poly(vinylidene fluoride)/ CaCu3Ti4O12 nanocrystal composite thick films

Nano-Sized Calcium Copper Titanate for the Fabrication of High Dielectric Constant Functional Ceramic–Polymer Composites

Poly (vinylidene Fluoride)/Mg Doped CaCu3Ti4O12 Composites with Improved Dielectric Properties

Dielectric and Thermal Properties of Novel Three-Component CCTO/MWCNTs/polyarylene Ether Nitrile Composite Films

Micromechanical modeling, thermal, and dielectric studies of poly (methyl methacrylate)-barium titanate composites

Fabrication and Characterization of PMMA/MWCNTs Composite Materials

Process and Microstructure to Achieve Ultra-high Dielectric Constant in Ceramic-Polymer Composites

The Effect of CaCu3Ti3.95Zr0.05O12 Fillers on Microstructure and Dielectric Behaviour of CaCu3Ti3.95Zr0.05O12/Polyimide Composites

Study on structural, dielectric, and thermal behavior of CaCu3Ti4O12@CoFe2O4 composites

Cacu3ti4o12-Pvdf Polymeric Composites With Enhanced Capacitive Energy Density

Preparation and Wide-Frequency Dielectric Properties of (ba0.5sr0.4ca0.1)tio3/poly(vinylidene Fluoride) Composites

Improving Dielectric Properties and Thermal Conductivity of Polymer Composites Withcacu3ti4o12and Β-Sichybrid Fillers

Synthesis and characterization of thermal properties of poly(p-cumylphenyl methacrylate-co-methoxyethyl methacrylate) copolymers

Modified Poly(phenylene Oxide)/(casr)tio3 Composites with Ultrahigh Permittivity and Low Loss for Microwave Substrates

Optical, Thermal, and Electrical Characterization of Polyvinyl Pyrrolidone/Carboxymethyl Cellulose Blend Scattered by Tungsten-Trioxide Nanoparticles

Dielectric Property and Ac Conductivity of P(VDF-CTFE)-PLZST Polymer-Ceramic Composite Films

Electrical and rheological percolation of PMMA/MWCNT nanocomposites as a function of CNT geometry and functionality

Effect of Europium Addition on the Microstructure and Dielectric Properties of CCTO Ceramic Prepared Using Conventional and Microwave Sintering