Abstract:A shape-stabilized composite phase change material (ss-CPCM) comprising polyethylene glycol (PEG) and porous carbon was prepared by absorbing PEG into porous carbon, assisted by ultrasound. In the composite, PEG served as a phase change material for thermal energy storage, and the porous carbon, which was prepared from fresh potato via freeze drying followed by heat treatment, was used as an absorbent that also acted as the supporting material. Various analytical techniques were used to investigate the chemical composition, microstructure, and thermal properties of the prepared PEG/porous carbon ss-CPCMs. Scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopic results indicated that PEG was well absorbed and encapsulated in the porous structure of the carbon and that there was no chemical reaction between them during the phase change process. The shape and exudation stability test results indicated that the PEG/porous carbon ss-CPCMs have excellent shape stability, compared to pristine PEG. The contact angle test suggested that the melting PEG has good level of wettability on the carbon so that melting PEG could be well protected from exudation in the porous carbon by surface tension effects, even if the temperature is higher than the melting point of PEG. Differential scanning calorimetric results showed that the PEG/porous carbon ss-CPCMs have considerable phase change enthalpies and thermal storage capabilities. In addition to this, the latent heats of ss-CPCMs increased with increasing contents of PEG in the composites, and the highest value was achieved when the amount of PEG was 50%. Moreover, the thermogravimetric analysis results showed that the composites had excellent thermal stabilities. Based on the above analyses, the prepared ss-CPCM with 50% PEG content proved to be a promising candidate for thermal energy storage applications.

Effect of porous carbon on thermal and physical properties of composite pure alkane/expanded vermiculite phase change energy storage materials

Preparation and Properties of Paraffin /LDPE /OMMT /graphite Phase Change Composite for Thermal Energy Storage

Research on the modification of microencapsulated phase change material for thermal energy storage by nano-SiO2 and graphite

Preparation of Paraffin/expanded Vermiculite with Enhanced Thermal Conductivity by Implanting Network Carbon in Vermiculite Layers

Effects of Acid Leaching and Organic Intercalation on the Thermophysical Properties of Paraffin/expanded Vermiculite Composite Phase Change Materials

Preparation and properties of fatty acid eutectics/expanded perlite and expanded vermiculite shape-stabilized materials for thermal energy storage in buildings

Preparation and Properties of Paraffin/Activated Carbon Composites As Phase Change Materials for Thermal Energy Storage

Enhancement of Thermo-Physical Properties of Expanded Vermiculite-Based Organic Composite Phase Change Materials for Improving the Thermal Energy Storage Efficiency

Characterization and Preparation of Paraffin/Modified Inorganic Porous Materials Composites As Building Energy Storage Materials

Preparation of Paraffin/γ-Al2O3 Composites As Phase Change Energy Storage Materials

Composite phase change materials of ultra-high molecular weight polyethylene/paraffin wax/carbon nanotubes with high performance and excellent shape stability for energy storage

Preparation and thermal properties of shape-stabilized composite phase change materials based on polyethylene glycol and porous carbon prepared from potato

Thermal Behavior of Composite Phase Change Materials Based on Polyethylene Glycol and Expanded Vermiculite with Modified Porous Carbon Layer

Enhanced Thermal Conductivity of Composite Phase Change Materials Based on Carbon Modified Expanded Perlite

Preparation and Characterization of Capric-Palmitic-stearic Acid Ternary Eutectic Mixture/expanded Vermiculite Composites As Form-Stabilized Thermal Energy Storage Materials

Shape-stable composite phase change materials encapsulated by lignin-based ordered porous carbon for thermal energy storage

Structure, Characterization and Thermal Properties of the Form-Stable Paraffin/High-Density Polyethylene/Expanded Graphite/Epoxy Resin Composite PCMs for Thermal Energy Storage

Multistage Porous Carbon Derived from Enzyme-Treated Waste Walnut Green Husk and Polyethylene Glycol for Phase Change Energy Storage

Supercooling Suppression and Thermal Conductivity Enhancement of Na2HPO4·12H2O/Expanded Vermiculite Form-Stable Composite Phase Change Materials with Alumina for Heat Storage

Polyethylene Glycol/Expanded Vermiculite Shape-Stabilized Composite Phase Change Materials for Thermal Energy Storage

Polyethylene Glycol-Carbon Nanotubes/Expanded Vermiculite Form-Stable Composite Phase Change Materials: Simultaneously Enhanced Latent Heat and Heat Transfer