Low-carbon recycling of spent lithium iron phosphate batteries via a hydro-oxygen repair route

Kang Liu,Junxiong Wang,Mengmeng Wang,Qiaozhi Zhang,Yang Cao,Longbin Huang,Marjorie Valix,Daniel C. W. Tsang

DOI: https://doi.org/10.1039/d3gc00472d

IF: 9.8

2023-06-29

Green Chemistry

Abstract:In this study, we proposed a sequential and scalable hydro-oxygen repair (HOR) route consisting of key steps involving cathode electrode separation, oxidative extraction of lithium (Li), and lithium iron phosphate (LiFePO 4 ) crystal restoration, to achieve closed-loop recycling of spent LiFePO 4 batteries. A hydro-oxygen environment (with a cathode electrode : H 2 O 2 ratio of 30 g mL −1 ) was first used to achieve nondestructive separation of the LiFePO 4 cathode material and aluminum foil within a short period of time (0.25 min). The selective and high-efficiency extraction of Li from exfoliated LiFePO 4 cathode materials was subsequently achieved by mechanochemically coupled oxidation potential regulation (conditions: 10 min, a rotational speed of 1000 rpm, and a LiFePO 4 cathode material : H 2 O 2 ratio of 1 : 37.5 g mL −1 ). The LiFePO 4 crystals were successfully restored via a solid phase sintering process using the extracted Li and residual iron phosphate framework, and the regenerated LiFePO 4 crystal exhibited a considerable specific electrochemical capacity (∼151.2 mA h g −1 , 1C), which is comparable to that of commercial cathode materials. A life cycle assessment demonstrated that the HOR route can significantly reduce carbon emissions by −0.38 kg CO 2 eq. and smog release by −0.17 kg O 3 eq. per kg of spent LiFePO 4 batteries, thus contributing to a circular economy and global decarbonization.

chemistry, multidisciplinary,green & sustainable science & technology

What problem does this paper attempt to address?

This paper aims to address the low-carbon recycling issue of discarded lithium iron phosphate batteries (LiFePO₄ batteries). Specifically, the paper proposes a method based on the hydro-oxygen repair route (HOR) for recycling discarded lithium iron phosphate batteries and evaluates the environmental impact and economic benefits of this method. ### Main Research Content: 1. **Hydro-Oxygen Repair Route (HOR)**: Through this method, researchers can effectively separate and recover various components of the battery, including aluminum foil, copper foil, plastic, and active materials. 2. **Environmental Impact Assessment**: By conducting a Life Cycle Assessment (LCA) of the HOR method, researchers found that this method has a lower carbon footprint and acid rain formation risk compared to traditional pyrometallurgy and hydrometallurgy recycling processes. 3. **Economic Benefit Analysis**: Through a cost-benefit analysis of the recycling process, the research team found that the HOR method is not only environmentally friendly but also economically competitive. ### Conclusion: Through this study, researchers demonstrated that the HOR method is an efficient and environmentally friendly technology for recycling discarded lithium iron phosphate batteries, which is expected to be widely applied in the future.

Low-carbon recycling of spent lithium iron phosphate batteries via a hydro-oxygen repair route

A Sustainable Closed-Loop Process of Oxidation Leaching and Regeneration for Lithium Iron Phosphate Materials from Spent Batteries

Sustainable reprocessing of lithium iron phosphate batteries: A recovery approach using liquid-phase method at reduced temperature

A mild closed-loop process for lithium–iron separation and cathode materials regeneration from spent LiFePO 4 batteries

A sustainable closed-loop method of selective oxidation leaching and regeneration for lithium iron phosphate cathode materials from spent batteries

Cyclic Redox Strategy for Sustainable Recovery of Lithium Ions from Spent Lithium Iron Phosphate Batteries

Direct regeneration of fluorine-doped carbon-coated LiFePO4 cathode material from spent lithium-ion battery

Conversion of LiFePO4 to FePO4 via Selective Lithium Bicarbonation: A Direct Pathway Towards Battery Recycling

Direct Regeneration of Degraded LiFePO4 Cathode via Reductive Solution Relithiation Regeneration Process

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching

High-efficiency leaching process for selective leaching of lithium from spent lithium iron phosphate

A Facile Route for the Efficient Leaching, Recovery, and Regeneration of Lithium and Iron from Waste Lithium Iron Phosphate Cathode Materials

Towards a sustainable approach using mineral or carboxylic acid to recover lithium from lithium iron phosphate batteries

Room-temperature Direct Regeneration of Spent LiFePO4 Cathode Using the External Short Circuit Strategy

Direct regeneration of spent LiFePO4 cathode material via a simple solid-phase method

A green and sustainable strategy toward lithium resources recycling from spent batteries

Sustainable Upcycling of Spent LiCoO2 to an Ultra-Stable Battery Cathode at High Voltage

Ferrioxalate photolysis-assisted green recovery of valuable resources from spent lithium iron phosphate batteries

Near-to-Stoichiometric Acidic Recovery of Spent Lithium-Ion Batteries through Induced Crystallization

Direct Regeneration and Performance of Spent LiFePO4 Via a Green Efficient Hydrothermal Technique

A Facile Recovery Process for Cathodes from Spent Lithium Iron Phosphate Batteries by Using Oxalic Acid