Abstract:Purpose This study aims to analyse the deep resource mining that causes high in situ stress, and the disturbance of tunnelling and mining which may induce large stress concentration, plastic deformation and rock strata compression deformation. The depth of deep resources, excavation rate and multilayered heterogeneity are critical factors of excavation disturbance in deep rock. However, at present, there are few engineering practices used in deep resource mining, and it is difficult to analyse the high in situ stress and dynamic three-dimensional (3D) excavation process in laboratory experiments. As a result, an understanding of the behaviours and mechanisms of the dynamic evolution of the stress field and plastic zone in deep tunnelling and mining surrounding rock is still lacking. Design/methodology/approach This study introduced a 3D engineering-scale finite element model and analysed the scheme involved the elastoplastic constitutive and element deletion techniques, while considering the influence of the deep rock mass of the roadway excavation, coal seam mining-induced stress, plastic zone in the process of mining disturbance of the in situ stress state, excavation rate and layered rock mass properties at the depths of 500 m, 1,500 m and 2,500 m of several typical coal seams, and the tunnelling and excavation rates of 0.5 m/step, 1 m/step and 2 m/step. An engineering-scale numerical model of the layered rock and soil body in an actual mining area were also established. Findings The simulation results of the surrounding rock stress field, dynamic evolution and maximum value change of the plastic zone, large deformation and settlement of the layered rock mass are obtained. The numerical results indicate that the process of mining can be accelerated with the increase in the tunnelling and excavation rate, but the vertical concentrated stress induced by the surrounding rock intensifies with the increase in the excavation rate, which becomes a crucial factor affecting the instability of the surrounding rock. The deep rock mass is in the high in situ stress state, and the stress and plastic strain maxima of the surrounding rock induced by the tunnelling and mining processes increase sharply with the excavation depth. In ultra-deep conditions (depth of 2,500 m), the maximum vertical stress is quickly reached by the conventional tunnelling and mining process. Compared with the deep homogeneous rock mass model, the multilayered heterogeneous rock mass produces higher mining-induced stress and plastic strain in each layer during the entire process of tunnelling and mining, and each layer presents a squeeze and dislocation deformation. Originality/value The results of this study can provide a valuable reference for the dynamic evolution of stress and plastic deformation in roadway tunnelling and coal seam mining to investigate the mechanisms of in situ stress at typical depths, excavation rates, stress concentrations, plastic deformations and compression behaviours of multilayered heterogeneity.

Validation of Diametrical Core Deformation Technique for Mining-Induced Stress Estimation: A Case Study

Practical Methodology for Evaluating Mining Front Stability Based on the Diametrical Core Deformation Technique

A Cohesive Model-Based Nonlinear Discontinuous Deformation Analysis for Tensile Fracture in Geotechnical Materials

Numerical Simulation of Mining-Induced Stress Evolution and Fault Slip Behavior in Deep Mining

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

Rapid In-Situ Stress Measurement in Vertical Borehole Based on Borehole Diametrical Deformation Analysis

Evaluation of Safety and Deformation Characteristics of the Secondary Stope Sandwiched Between Backfills in Underground Iron Mines

Innovative computational model for optimal deep coal mining under large-scale crustal stress conditions

Rock strata movement and subsidence based on MDDA, an improved discontinuous deformation analysis method in mining engineering

A path for evaluating the mechanical response of rock masses based on deep mining-induced microseismic data: A case study

A new method for characterization of stress concentration degree of coal mine roadway surrounding rock

Rock Mass Stability Investigation Around Tunnels in an Underground Mine in USA

Back-analysis for initial ground stress field at a diamond mine using machine learning approaches

Stress Evolution of Repeated Mining Based on the Double-Yield Model in Multiple Coal Seam

Numerical analysis for mining-induced stress and plastic evolution involving influencing factors: high in situ stress, excavation rate and multilayered heterogeneity

Anelastic strain recovery in situ stress measurement method and its application prospect in underground mines

Three-dimensional stress variation characteristics in deep hard rock of CJPL-II project based on in-situ monitoring

Calibration of Rockmass Failure Criteria for Mines Using Seismic Monitoring Data

A Data-Intensive Numerical Modeling Method for Large-Scale Rock Strata and Its Application in Mining Subsidence Prediction

Monitoring and Modelling Stress State Near Major Geological Structures in an Underground Coal Mine for Coal Burst Assessment

Field and Numerical Study on Deformation and Failure Characteristics of Deep High-Stress Main Roadway in Dongpang Coal Mine