Abstract:Purpose This study aims to analyse the deep resource mining that causes high in situ stress, and the disturbance of tunnelling and mining which may induce large stress concentration, plastic deformation and rock strata compression deformation. The depth of deep resources, excavation rate and multilayered heterogeneity are critical factors of excavation disturbance in deep rock. However, at present, there are few engineering practices used in deep resource mining, and it is difficult to analyse the high in situ stress and dynamic three-dimensional (3D) excavation process in laboratory experiments. As a result, an understanding of the behaviours and mechanisms of the dynamic evolution of the stress field and plastic zone in deep tunnelling and mining surrounding rock is still lacking. Design/methodology/approach This study introduced a 3D engineering-scale finite element model and analysed the scheme involved the elastoplastic constitutive and element deletion techniques, while considering the influence of the deep rock mass of the roadway excavation, coal seam mining-induced stress, plastic zone in the process of mining disturbance of the in situ stress state, excavation rate and layered rock mass properties at the depths of 500 m, 1,500 m and 2,500 m of several typical coal seams, and the tunnelling and excavation rates of 0.5 m/step, 1 m/step and 2 m/step. An engineering-scale numerical model of the layered rock and soil body in an actual mining area were also established. Findings The simulation results of the surrounding rock stress field, dynamic evolution and maximum value change of the plastic zone, large deformation and settlement of the layered rock mass are obtained. The numerical results indicate that the process of mining can be accelerated with the increase in the tunnelling and excavation rate, but the vertical concentrated stress induced by the surrounding rock intensifies with the increase in the excavation rate, which becomes a crucial factor affecting the instability of the surrounding rock. The deep rock mass is in the high in situ stress state, and the stress and plastic strain maxima of the surrounding rock induced by the tunnelling and mining processes increase sharply with the excavation depth. In ultra-deep conditions (depth of 2,500 m), the maximum vertical stress is quickly reached by the conventional tunnelling and mining process. Compared with the deep homogeneous rock mass model, the multilayered heterogeneous rock mass produces higher mining-induced stress and plastic strain in each layer during the entire process of tunnelling and mining, and each layer presents a squeeze and dislocation deformation. Originality/value The results of this study can provide a valuable reference for the dynamic evolution of stress and plastic deformation in roadway tunnelling and coal seam mining to investigate the mechanisms of in situ stress at typical depths, excavation rates, stress concentrations, plastic deformations and compression behaviours of multilayered heterogeneity.

Stress Evolution of Repeated Mining Based on the Double-Yield Model in Multiple Coal Seam

Simulation of Mining-Induced Ground Damage Using Orthogonal Experiments to Determine Key Parameters of Super-Large Coalface: A Case Study in Shendong Coalfield in China

Research on Multi-Physical Field Characteristics of Deep Coal Seam Mining Based on the Rock-Coal-Rock Model

Application of double-yield model in numerical simulation of stability of mining filling body

Numerical Simulation of Mining-Induced Stress Evolution and Fault Slip Behavior in Deep Mining

Innovative computational model for optimal deep coal mining under large-scale crustal stress conditions

A Data-Intensive Numerical Modeling Method for Large-Scale Rock Strata and Its Application in Mining Subsidence Prediction

Determination of mining-induced stress based on mining face hydraulic support stress and micro-seismicity

Evolution law of mining-induced overburden stratum stress and fracture fields in inclined coal seam

Numerical Multifield Coupling Model of Stress Evolution and Gas Migration: Application of Disaster Prediction and Mining Sustainability Development

Similarity Simulation on the Movement Characteristics of Surrounding Rock and Floor Stress Distribution for Large-Dip Coal Seam

The Distribution Law of Ground Stress Field in Yingcheng Coal Mine Based on Rhino Surface Modeling

Study on the Spatiotemporal Dynamic Evolution Law of a Deep Thick Hard Roof and Coal Seam

Numerical analysis for mining-induced stress and plastic evolution involving influencing factors: high in situ stress, excavation rate and multilayered heterogeneity

Numerical Simulation of Coalbed Methane under the Mining Conditions Based on Dynamic Virtual Well and Variable Permeability Field

Numerical Simulation of Mine Water Inflow with an Embedded Discrete Fracture Model: Application to the 16112 Working Face in the Binhu Coal Mine, China

Numerical simulation study on the evolution characteristics of the stress induced by mining in deep adjacent working faces

Study on stress variation law of hard concretion coal under the action of pick based on DYNA

Numerical modelling of loose top coal and roof mass movement for a re-mined seam using the top coal caving method

On strata damage and stress disturbance induced by coal mining based on physical similarity simulation experiments

Experimental study on the interrelation of multiple mechanical parameters in overburden rock caving process during coal mining in longwall panel