Dynamics of Surfactants Spreading on Gel-like Materials: Cracking and Pattern Formation

Constantine Spandagos,Paul Luckham,Omar Matar

DOI: https://doi.org/10.48550/arXiv.1010.3196

IF: 0.673

2010-10-15

Fluid Dynamics

Abstract:We study the dynamics of surfactants spreading on gels, paying particular attention to the pattern formation accompanying the flow. The latter results from gel-cracking, promoted by Marangoni stresses, and resemble starbursts.

What problem does this paper attempt to address?

Transient structures in rupturing thin-films: Marangoni-induced symmetry-breaking pattern formation in viscous fluids

Li Shen,Fabian Denner,Neal Morgan,Berend van Wachem,Daniele Dini

DOI: https://doi.org/10.48550/arXiv.1905.07337

2019-05-17

Abstract:In the minutes immediately preceeding the rupture of a soap bubble, distinctive and repeatable patterns can be observed. These quasi-stable transient structures are associated with the instabilities of the complex Marangoni flows on the curved thin film in the presence of a surfactant solution. Here, we report a generalised Cahn-Hilliard-Swift-Hohenberg model derived using asymptotic theory which describes the quasi-elastic wrinkling pattern formation and the consequent coarsening dynamics in a curved surfactant-laden thin film. By testing the theory against experiments on soap bubbles, we find quantitative agreement with the analytical predictions of the nucleation and the early coarsening phases associated with the patterns. Our findings provide fundamental physical understanding that can be used to (de-)stabilise thin films in the presence of surfactants and have important implications for both natural and industrial contexts, such as the production of thin coating films, foams, emulsions and sprays.

Fluid Dynamics,Pattern Formation and Solitons
Empirical Potential Function for Simplified Protein Models: Combining Contact and Local Sequence-Structure Descriptors

Jinfeng Zhang,Rong Chen,Jie Liang

DOI: https://doi.org/10.1002/prot.20809

2006-01-20

Abstract:An effective potential function is critical for protein structure prediction and folding simulation. Simplified protein models such as those requiring only $C_\alpha$ or backbone atoms are attractive because they enable efficient search of the conformational space. We show residue specific reduced discrete state models can represent the backbone conformations of proteins with small RMSD values. However, no potential functions exist that are designed for such simplified protein models. In this study, we develop optimal potential functions by combining contact interaction descriptors and local sequence-structure descriptors. The form of the potential function is a weighted linear sum of all descriptors, and the optimal weight coefficients are obtained through optimization using both native and decoy structures. The performance of the potential function in test of discriminating native protein structures from decoys is evaluated using several benchmark decoy sets. Our potential function requiring only backbone atoms or $C_\alpha$ atoms have comparable or better performance than several residue-based potential functions that require additional coordinates of side chain centers or coordinates of all side chain atoms. By reducing the residue alphabets down to size 5 for local structure-sequence relationship, the performance of the potential function can be further improved. Our results also suggest that local sequence-structure correlation may play important role in reducing the entropic cost of protein folding.

Biomolecules
Flow-driven pattern formation during coacervation of Xanthan Gum with a cationic surfactant

Yorgos Stergiou,Alexandros Perrakis,Anne De Wit,Karin Schwarzenberger

DOI: https://doi.org/10.1039/d4cp01055h

IF: 3.3

2024-12-15

Physical Chemistry Chemical Physics

Abstract:We experimentally demonstrate that the coacervation of a biopolymer can trigger a hydrodynamic instability when a coacervate is formed upon injection of a Xanthan Gum dispersion into a cationic surfactant (C_{14}TAB) solution. The local increase of the viscosity due to the coacervate formation induces a viscous fingering instability. Three characteristic displacement regimes were observed: a viscous fingering dominated regime, a buoyancy-controlled ''volcano'' regime and a ''fan''-like regime determined by the coacervate membrane dynamics. The dependence of the spatial properties of the viscous fingering pattern on the Péclet and Rayleigh numbers is investigated.

chemistry, physical,physics, atomic, molecular & chemical
Role of surfactant-induced Marangoni effects in droplet dynamics on a solid surface in shear flow

Xinglong Shang,Zhengyuan Luo,Guoqing Hu,Bofeng Bai

DOI: https://doi.org/10.1016/j.colsurfa.2022.130142

2022-01-01

Abstract:We address the dynamics of a surfactant-laden droplet on a solid surface in simple shear flow numerically. Our analysis uses the front-tracking method to take surfactant transport into account. The interfacial tension and the slip coefficient, both of which depend heavily on the surfactant concentration, are fully integrated into the generalized Navier boundary condition to model the moving contact lines. Accurate prediction of droplet motion indicates that the surfactant can change droplet behavior drastically. Surfactant-induced effects, such as interfacial tension reduction, the Marangoni stress, and wettability alternation, are investigated for various capillary numbers, surface wettabilities, elasticity numbers, and surface Péclet numbers. Deformation and motion of a sliding droplet are enhanced by the Marangoni effect, which is associated with an interfacial tension gradient. When the capillary number reaches a critical value, the sliding-to-detachment and detachment-to-pinch-off transitions occur. Both transitions can be triggered and accelerated by a surfactant, especially when convection is dominant. As a result, the critical capillary number decreases, but exhibits a non-monotonic relationship with the elasticity number and Péclet number. The mechanisms that underlie the effect of Marangoni stress are discussed by analyzing the distributions of the surfactant concentration and the hydrodynamic forces exerted on the droplet. Accumulation of surfactants near the receding contact line reverses the local concentration gradient, attempts to change its direction along the interface, and delays droplet detachment. Furthermore, the strong surfactant dilution reduces both the surfactant concentration and the interfacial tension gradient, and thereby increasing the critical value for droplet pinch-off.
Self-healing Dynamics of Surfactant Coatings on Thin Viscous Films

Stephen L. Strickland,Matthew Hin,M. Richard Sayanagi,Cameron Conti,Karen E. Daniels,Rachel Levy

DOI: https://doi.org/10.1063/1.4872020

2014-02-12

Abstract:We investigate the dynamics of an insoluble surfactant on the surface of a thin viscous fluid spreading inward to fill a surfactant-free region. During the initial stages of surfactant self-healing, Marangoni forces drive an axisymmetric ridge inward to coalesce into a growing central distension; this is unlike outward-spreading, in which the ridge decays. In later dynamics, the distension slowly decays and the surfactant concentration equilibrates. We present results from experiments in which we simultaneously measure the surfactant concentration (using fluorescently-tagged lipids) and the fluid height profile (via laser profilometry). We compare the results to simulations of a mathematical model using parameters from our experiments. For surfactant concentrations close to but below the critical monolayer concentration, we observe agreement between the height profiles in the numerical simulations and the experiment, but disagreement in the surfactant distribution. In experiments at lower concentrations, the surfactant spreading and formation of a Marangoni ridge are no longer present, and a persistent lipid-free region remains. This observation, which is not captured by the simulations, has undesirable implications for applications where uniform coverage is advantageous. Finally, we probe the generality of the effect, and find that distensions of similar size are produced independent of initial fluid thickness, size of initial clean region, and surfactant type.

Fluid Dynamics,Soft Condensed Matter
Capillary fracture of ultrasoft gels: heterogeneity and delayed nucleation

Marion Grzelka,Joshua B. Bostwick,Karen E. Daniels

DOI: https://doi.org/10.48550/arXiv.1608.06357

2016-08-23

Soft Condensed Matter

Abstract:A droplet of surfactant spreading on an ultrasoft ($E \lesssim 100$ Pa) gel substrate will produce capillary fractures at the gel surface; these fractures originate at the contact-line and propagate outwards in a starburst pattern. There is an inherent variability in both the number of fractures formed and the time delay before fractures form. In the regime where single fractures form, we observe a Weibull-like distribution of delay times, consistent with a thermally-activated process. The shape parameter is close to 1 for softer gels (a Poisson process), and larger for stiffer gels (indicative of aging). For single fractures, the characteristic delay time is primarily set by the elastocapillary length of the system, calculated from the differential in surface tension between the droplet and the substrate, rather than the elastic modulus as for stiffer systems. For multiple fractures, all fractures appear simultaneously and long delay times are suppressed. The delay time distribution provides a new technique for probing the energy landscape and fracture toughness of ultrasoft materials.
Surfactant spreading in a two-dimensional cavity and emergent contact-line singularities

Richard Mcnair,Oliver E. Jensen,Julien R. Landel

DOI: https://doi.org/10.1017/jfm.2021.911

IF: 3.7

2021-11-11

Journal of Fluid Mechanics

Abstract:We model the advective Marangoni spreading of insoluble surfactant at the free surface of a viscous fluid that is confined within a two-dimensional rectangular cavity. Interfacial deflections are assumed small, with contact lines pinned to the walls of the cavity, and inertia is neglected. Linearising the surfactant transport equation about the equilibrium state allows a modal decomposition of the dynamics, with eigenvalues corresponding to decay rates of perturbations. Computation of the family of mutually orthogonal two-dimensional eigenfunctions reveals singular flow structures near each contact line, resulting in spatially oscillatory patterns of shear stress and a pressure field that diverges logarithmically. These singularities at a stationary contact line are associated with dynamic compression of the surfactant monolayer. We show how they can be regularised by weak surface diffusion. Their existence highlights the need for careful treatment in computations of unsteady advection-dominated surfactant transport in confined domains.

mechanics,physics, fluids & plasmas
Simulating Surfactant Spreading: Impact of a Physically Motivated Equation of State

Dina Sinclair,Rachel Levy,Karen E. Daniels

DOI: https://doi.org/10.48550/arXiv.1602.05261

2016-02-17

Abstract:For more than two decades, a single model for the spreading of a surfactant-driven thin liquid film has dominated the applied mathematics literature on the subject. Recently, through the use of fluorescently-tagged lipids, it has become possible to make direct, quantitative comparisons between experiments and models. These comparisons have revealed two important discrepancies between simulations and experiments: the spatial distribution of the surfactant layer, and the timescale over which spreading occurs. In this paper, we present numerical simulations that demonstrate the impact of the particular choice of the equation of state (EoS) relating the surfactant concentration to the surface tension. Previous choices of the model EoS have been an ad-hoc decreasing function. Here, we instead propose an empirically-motivated equation of state; this provides a route to resolving some discrepancies and raises new issues to be pursued in future experiments. In addition, we test the influence of the choice of initial conditions and values for the non-dimensional groups. We demonstrate that the choice of EoS improves the agreement in surfactant distribution morphology between simulations and experiments, and impacts the dynamics of the simulations. The relevant feature of the EoS, the gradient, has distinct regions for empirically motivated choices, which suggests that future work will need to consider more than one timescale. We observe that the non-dimensional number controlling the relative importance of gravitational vs. capillary forces has a larger impact on the dynamics than the other non-dimensional groups. Finally, we observe that the experimental approach of using a ring to contain the surfactant could affect the surfactant and fluid dynamics if it disrupts the intended initial surfactant distribution. However, the meniscus itself does not significantly affect the dynamics.

Fluid Dynamics
Surfactant-laden bubble bursting: dynamics of capillary waves and Worthington jet at large Bond number

Paula Pico,Lyes Kahouadji,Seungwon Shin,Jalel Chergui,Damir Juric,Omar K. Matar

2024-04-14

Abstract:We present a numerical study of the main sub-stages preceding aerosol formation via bursting bubbles: capillary wave propagation along the bubble, convergence at the bubble's apex, the ascent of a Worthington jet and its break-up to release liquid drops. We focus on two crucial yet overlooked aspects of the system: the presence of surface-active agents and dynamics driven by non-negligible gravitational effects, quantified by the Bond number. Our results propose, for the first time, a mechanism explaining capillary wave retardation in the presence of surfactants, involving the transition from bi- to uni-directional Marangoni stresses, which pull the interface upwards, countering the motion of the waves. We also quantitatively elucidate the variable nature of the waves' velocity with various surfactant parameters, including surfactant solubility and elasticity, a departure from the constant behaviour well-documented in clean interfaces.

Fluid Dynamics
Surfactant Spreading on a Thin Liquid Film: Reconciling Models and Experiments

Ellen R. Swanson,Stephen L. Strickland,Michael Shearer,Karen E. Daniels

DOI: https://doi.org/10.48550/arXiv.1306.4881

2013-06-20

Abstract:The spreading dynamics of surfactant molecules on a thin fluid layer is of both fundamental and practical interest. A mathematical model formulated by Gaver and Grotberg 1990 describing the spreading of a single layer of insoluble surfactant has become widely accepted, and several experiments on axisymmetric spreading have confirmed its predictions for both the height profile of the free surface and the spreading exponent (the radius of the circular area covered by surfactant grows as t^{1/4}). However, these prior experiments have primarily utilized surfactant quantities exceeding (sometimes far exceeding) a monolayer. In this paper, we report that this regime is characterized by a mismatch between the timescales of the experiment and model, and additionally find that the spatial distribution of surfactant molecules differs substantially from the model prediction. For experiments performed in the monolayer regime for which the model was developed, the surfactant layer is observed to have a spreading exponent of less than 1/10, far below the predicted value, and the surfactant distribution is also in disagreement. These findings suggest that the model is inadequate for describing the spreading of insoluble surfactants on thin fluid layers.

Fluid Dynamics,Soft Condensed Matter
Effect of surfactant on elongated bubbles in capillary tubes at high Reynolds number

Assen Batchvarov,Lyes Kahouadji,Mirco Magnini,Cristian R. Constante-Amores,Richard V .Craster,Seungwon Shin,Jalel Chergui,Damir Juric,Omar K. Matar

DOI: https://doi.org/10.48550/arXiv.2005.12269

2020-05-24

Abstract:The effect of surfactants on the tail and film dynamics of elongated gas bubbles propagating through circular capillary tubes is investigated by means of an extensive three-dimensional numerical study using a hybrid front-tracking/level-set method. The focus is on the visco-inertial regime, which occurs when the Reynolds number of the flow is much larger than unity. Under these conditions, `clean' bubbles exhibit interface undulations in the proximity of the tail \cite{Magnini_prf_2017}, with an amplitude that increases with the Reynolds number. We perform a systematic analysis of the impact of a wide range of surfactant properties, including elasticity, bulk surfactant concentration, solubility, and diffusivity, on the bubble and flow dynamics in the presence of inertial effects. The results show that the introduction of surfactants is effective in suppressing the tail undulations as they tend to accumulate near the bubble tail. Here, large Marangoni stresses are generated, which lead to a local `rigidification' of the bubble. This effect becomes more pronounced for larger surfactant elasticities and adsorption depths. At reduced surfactant solubility, a thicker rigid film region forms at the bubble rear, where a Couette film flow is established, while undulations still appear at the trailing edge of the downstream `clean' film region. In such conditions, the bubble length becomes an influential parameter, with short bubbles becoming completely rigid.

Fluid Dynamics
Shear Layers and Plugs in the Capillary Flow of Wormlike Micellar Gels

Ronak Rajesh Gupta,Masoud Daneshi,Ian Frigaard,Gwynn Elfring

DOI: https://doi.org/10.1039/d4sm00105b

IF: 4.046

2024-05-29

Soft Matter

Abstract:Wormlike micellar solutions formed by long-chained zwitterionic surfactants show gel-like rheology at room temperature and have recently been found to exhibit other complex and interesting rheological features. We study the dynamics of these wormlike micellar gels in a pipe-flow scenario using particle imaging and tracking velocimetry and report the existence of plug flows with strong wall slip and non-parabolic velocity profiles for different surfactant concentrations and imposed flow rates. We rationalize these results as features of a developing transient flow of a viscoelastic solution in space and time. We show that evolution of shear layers is governed by intermittent flows, asymmetric velocity profiles and flow induced heterogeneity. Our experiments shed light on the transient fluid dynamics of wormlike micelles in simple geometries and highlight the complexity of flows involving wormlike micellar gels and similar soft matter systems in canonical flows.

polymer science,chemistry, physical,materials science, multidisciplinary,physics
Patterning of Small Particles by a Surfactant-Enhanced Marangoni-Bénard Instability

Van X. Nguyen,Kathleen J. Stebe

DOI: https://doi.org/10.1103/physrevlett.88.164501

IF: 8.6

2002-04-03

Physical Review Letters

Abstract:Evaporating drops provide a means of organizing particles suspended within them. Here, the manner in which surfactants alter these patterns is studied as a function of the surface state of an insoluble monolayer at the drop interface. The surface state is visualized throughout the drop evolution using fluorescence microscopy. A regime of surfactant coverage is identified that creates conditions that enhance the Marangoni-Bénard instability. This result was not anticipated in prior studies, in which surfactants are predicted to prevent this instability. These data demonstrate that, by tuning the liquid-gas boundary condition, the patterns formed from an evaporating drop can be controlled.

physics, multidisciplinary
Surfactant-dependent contact line dynamics and droplet spreading on textured substrates: derivations and computations

Yuan Gao,Jian-Guo Liu

DOI: https://doi.org/10.1016/j.physd.2021.133067

2021-10-03

Abstract:We study spreading of a droplet, with insoluble surfactant covering its capillary surface, on a textured substrate. In this process, the surfactant-dependent surface tension dominates the behaviors of the whole dynamics, particularly the moving contact lines. This allows us to derive the full dynamics of the droplets laid by the insoluble surfactant: (i) the moving contact lines, (ii) the evolution of the capillary surface, (iii) the surfactant dynamics on this moving surface with a boundary condition at the contact lines and (iv) the incompressible viscous fluids inside the droplet. Our derivations base on Onsager's principle with Rayleigh dissipation functionals for either the viscous flow inside droplets or the motion by mean curvature of the capillary surface. We also prove the Rayleigh dissipation functional for viscous flow case is stronger than the one for the motion by mean curvature. After incorporating the textured substrate profile, we design a numerical scheme based on unconditionally stable explicit boundary updates and moving grids, which enable efficient computations for many challenging examples showing significant impacts of the surfactant to the deformation of droplets.

Fluid Dynamics,Analysis of PDEs,Numerical Analysis
Geometrical control of dissipation during the spreading of liquids on soft solids

Menghua Zhao,Julien Dervaux,Tetsuharu Narita,François Lequeux,Laurent Limat,Matthieu Roché

DOI: https://doi.org/10.1073/pnas.1712562115

IF: 11.1

2018-02-05

Proceedings of the National Academy of Sciences

Abstract:Significance Soft solids such as gels are routinely used to coat solid surfaces to control wetting and adhesion. While wetting statics on these coatings have received a lot of attention, the dynamics have hardly been studied. Here, we show that energy dissipation during spreading depends not only on the viscoelasticity of the gel but also on the thickness of the coating. We provide both an analytical model and a scaling law that predict the dynamic contact angle—i.e., the signature of dissipation in the droplet–substrate–atmosphere system—as a function of the mechanical properties of the gel and the thickness of the coating. Finally, we show that droplets moving on coatings having thickness gradients drift toward regions of higher dissipation.

multidisciplinary sciences
Emergence and Growth Dynamics of Wetting-induced Phase Separation on Soft Solids

Wenjie Qian,Weiwei Zhao,Tiezheng Qian,Qin Xu

2024-07-29

Abstract:Liquid droplets on soft solids, such as soft polymeric gels, can induce substantial surface deformations, leading to the formation of wetting ridges at contact points. While these contact ridges have been shown to govern the rich surface mechanics on compliant substrates, the inherently divergent characteristics of contact points and the multiphase nature of soft reticulated gels pose great challenges for continuum mechanical theories in modeling soft wetting phenomena. In this study, we report in-situ experimental characterizations of the emergence and growth dynamics of the wetting-induced phase separation. The measurements demonstrate how the migration of free chains prevents the stress singularities at contact points. Based on the Onsager variational principle, we present a phenomenological model that effectively captures the extraction process of free chains, including a crossover from a short-term diffusive state to a long-term equilibrium state. By comparing model predictions with experimental results for varied crosslinking densities, we reveal how the intrinsic material parameters of soft gels dictate phase separation dynamics.

Soft Condensed Matter,Materials Science,Fluid Dynamics
Dynamics of swelling and drying in a spherical gel

Thibault Bertrand,Jorge Peixinho,Shomeek Mukhopadhyay,Christopher W. MacMinn

DOI: https://doi.org/10.1103/PhysRevApplied.6.064010

2016-12-23

Abstract:Swelling is a volumetric-growth process in which a porous material expands by spontaneous imbibition of additional pore fluid. Swelling is distinct from other growth processes in that it is inherently poromechanical: Local expansion of the pore structure requires that additional fluid be drawn from elsewhere in the material, or into the material from across the boundaries. Here, we study the swelling and subsequent drying of a sphere of hydrogel. We develop a dynamic model based on large-deformation poromechanics and the theory of ideal elastomeric gels, and we compare the predictions of this model with a series of experiments performed with polyacrylamide spheres. We use the model and the experiments to study the complex internal dynamics of swelling and drying, and to highlight the fundamentally transient nature of these strikingly different processes. Although we assume spherical symmetry, the model also provides insight into the transient patterns that form and then vanish during swelling as well as the risk of fracture during drying.

Soft Condensed Matter,Fluid Dynamics
Surface stress and shape relaxation of gelling droplets

J Godefroid,D Bouttes,A Marcellan,E Barthel,C Monteux

DOI: https://doi.org/10.1039/d3sm00533j

IF: 4.046

2023-10-18

Soft Matter

Abstract:Solidification is a heterogeneous transformation from liquid to solid, which usually combines transport, phase transition and mechanical strain. Predicting the shapes resulting from such a complex process is fascinating and has a wide range of implications from morphogenesis in biological tissues to industrial processes. For soft solids initially at equilibrium, elastic stresses, whether tensile or compressive, can be induced by heterogeneous volumetric deformations of the material. These stresses trigger surface instabilities leading to variations of curvature and shape of the solids. In this article, we study the shape evolution of elongated droplets of polymer and particle suspensions undergoing a solidification process caused by the inward diffusion of a gelling agent from the surface. We show experimentally and numerically that there appears a layer of gelled material growing at the surface. Due to volume contraction, this layer induces tensile stresses and drives a flow in the ungelled liquid core, resulting in the relaxation of the droplets toward spherical shapes. Over time, the thickness of this elastic membrane grows, hence the bending stiffness required to change its shape eventually balances the surface stresses, which arrests the relaxation process. These results provide general rules to understand the shape of solidifying materials combining both tension and bending driven deformations.
Spreading of aqueous droplets with common and superspreading surfactants. A molecular dynamics study

Panagiotis E. Theodorakis,Edward R. Smith,Erich A. Müller

DOI: https://doi.org/10.1016/j.colsurfa.2019.123810

2019-09-02

Abstract:The surfactant-driven spreading of droplets is an essential process in many applications ranging from coating flow technology to enhanced oil recovery. Despite the significant advancement in describing spreading processes in surfactant-laden droplets, including the exciting phenomena of superspreading, many features of the underlying mechanisms require further understanding. Here, we have carried out molecular dynamics simulations of a coarse-grained model with a force-field obtained from the statistical associating fluid theory to study droplets laden with common and superspreading surfactants. We have confirmed the important elements of the superspreading mechanism, i.e. the adsorption of surfactant at the contact line and the fast replenishment of surfactant from the bulk. Through a detailed comparison of a range of droplets with different surfactants, our analysis has indicated that the ability of surfactant to adsorb at the interfaces is the key feature of the superspreading mechanism. To this end, surfactants that tend to form aggregates and have a strong hydrophobic attraction in the aggregated cores prevent the fast replenishment of the interfaces, resulting in reduced spreading ability. We also show that various surfactant properties, such as diffusion and architecture, play a secondary role in the spreading process. Moreover, we discuss various drop properties such as the height, contact angle, and surfactant surface concentration, highlighting differences between superspreading and common surfactants. We anticipate that our study will provide further insight for applications requiring the control of wetting.

Fluid Dynamics,Soft Condensed Matter

Dynamics of Surfactants Spreading on Gel-like Materials: Cracking and Pattern Formation

Transient structures in rupturing thin-films: Marangoni-induced symmetry-breaking pattern formation in viscous fluids

Empirical Potential Function for Simplified Protein Models: Combining Contact and Local Sequence-Structure Descriptors

Flow-driven pattern formation during coacervation of Xanthan Gum with a cationic surfactant

Role of surfactant-induced Marangoni effects in droplet dynamics on a solid surface in shear flow

Self-healing Dynamics of Surfactant Coatings on Thin Viscous Films

Capillary fracture of ultrasoft gels: heterogeneity and delayed nucleation

Surfactant spreading in a two-dimensional cavity and emergent contact-line singularities

Simulating Surfactant Spreading: Impact of a Physically Motivated Equation of State

Surfactant-laden bubble bursting: dynamics of capillary waves and Worthington jet at large Bond number

Surfactant Spreading on a Thin Liquid Film: Reconciling Models and Experiments

Effect of surfactant on elongated bubbles in capillary tubes at high Reynolds number

Shear Layers and Plugs in the Capillary Flow of Wormlike Micellar Gels

Patterning of Small Particles by a Surfactant-Enhanced Marangoni-Bénard Instability

Surfactant-dependent contact line dynamics and droplet spreading on textured substrates: derivations and computations

Geometrical control of dissipation during the spreading of liquids on soft solids

Emergence and Growth Dynamics of Wetting-induced Phase Separation on Soft Solids

Dynamics of swelling and drying in a spherical gel

Surface stress and shape relaxation of gelling droplets

Spreading of aqueous droplets with common and superspreading surfactants. A molecular dynamics study