Abstract:By incorporating 1‐cyclohexene‐1‐ethanamine cation into the host 1‐phenylbutylamine cation spacer and fabricating mixed‐cations quasi‐2D perovskites, a homogeneous phase distribution in quasi‐2D perovskite films is achieved through precise tuning of the phase formation energy. The resulting PeLEDs exhibit remarkable performance with an external quantum efficiency (EQE) of 5.8% at 467 nm. Organic and inorganic hybrid perovskites are a class of solution‐processable semiconductors that hold significant promise for light‐emitting diode applications. However, the development of efficient blue perovskite light‐emitting diodes (PeLEDs) has remained a critical challenge. Although significant advancements have been achieved in the development of sky‐blue PeLEDs, the performance of pure‐blue and deep‐blue PeLEDs still lags. In this manuscript, by incorporating 1‐cyclohexene‐1‐ethanamine cation (CEA+) into the host 1‐phenylbutylamine cation (PBA+) spacer and fabricating mixed‐cations quasi‐2D perovskites, a homogeneous phase distribution in quasi‐2D perovskite films is achieved through precise tuning of the phase formation energy. The resulting PeLEDs exhibit remarkable performance with an external quantum efficiency (EQE) of 5.8% at 467 nm, which is one of the highest EQEs among the deep‐blue light quasi‐2D PeLED devices with emission wavelengths below 470 nm, Additionally, the device demonstrates a half‐lifetime of ≈ 25 min. Furthermore, the PeLEDs utilizing mixed‐cation perovskite exhibit a stable electroluminescence (EL) spectrum under varying voltage biases, even when the chlorine content in the halogen sites reaches as high as 30%. Overall, this work offers a novel and promising avenue to achieve both high EQE and a stable EL spectrum in blue‐light quasi‐2D PeLEDs.

Perovskite Phase Analysis by SEM Facilitating Efficient Quasi‐2D Perovskite Light‐Emitting Device Designs

Phase Stabilization for High-Performance Perovskite Light-Emitting Diodes

Tailoring the Surface Morphology and Phase Distribution for Efficient Perovskite Electroluminescence.

Rearranging the Phase Distribution of Quasi-2D Perovskite for Efficient and Narrow Emission Perovskite Light-Emitting Diodes

Tailoring the 2D/3D Phase Segregation for Highly Efficient Si-Based Perovskite Light-Emitting Diodes

Phase Aggregation Suppression of Homogeneous Perovskites Processed in Ambient Condition Toward Efficient Light‐Emitting Diodes

Smoothing Energy Transfer Enabling Efficient Large‐Area Quasi‐2D Perovskite Light‐Emitting Diodes

Efficient Green Quasi-Two-Dimensional Perovskite Light-Emitting Diodes Based on Mix-Interlayer

Performance-optimized and Phase Purity-Improved High-N Quasi-Two-dimensional Perovskite for Green Light-Emitting Diodes

Homogeneous Phase Distribution in Q‐2D Perovskites via Co‐assembly of Spacer Cations for Efficient Light‐emitting Diodes

Phase Distribution Management for High-Efficiency and Bright Blue Perovskite Light-Emitting Diodes

Simultaneous Phase Distribution Reconstruct and Defect Passivation for Efficient Quasi-2D Perovskite Light-Emitting Diodes

Probing Phase Distribution in 2D Perovskites for Efficient Device Design.

Perovskite Light‐Emitting Diodes with EQE Exceeding 28% through a Synergetic Dual‐Additive Strategy for Defect Passivation and Nanostructure Regulation

Efficient Quasi-2D Perovskite Light-Emitting Diodes Enabled by Regulating Phase Distribution with a Fluorinated Organic Cation

Multiple Phase Regulation Enables Efficient and Bright Quasi-2D Perovskite Light-Emitting Diodes

High-performance large-area quasi-2D perovskite light-emitting diodes

Co‐Interlayer Engineering for Homogenous Phase Quasi‐2‐D Perovskite and High‐Performance Deep‐Blue Light‐Emitting Diodes

Inorganic "Artificial Phase" CdSe/ZnS QDs Serve as the Host Material for White Emission Quasi‐2D Perovskite Light Emitting Devices

Energy‐Level Regulation and Low‐Dimensional Phase Rearrangement via a Multifunctional Spacer Group toward Efficient Sky‐Blue Quasi‐2D Perovskite Light‐Emitting Diodes

High‐n Phase Suppression for Efficient and Stable Blue Perovskite Light‐Emitting Diodes