Abstract:BACKGROUND: Computed tomographic angiography (CTA) is the gold standard in the diagnosis of most vascular pathologies. The optimal method to improve this technique is the use of anthropomorphic tissue-mimicking phantoms, since CTA is accompanied by radiation exposure and the risk of allergic reactions when using contrast agents. In addition to compliance with the X-ray properties of the vessel, the pulsations occurring in the aorta in vivo must be simulated. A review of existing solutions demonstrates a small number of national developments in this area at a relatively high cost of foreign analogues. Moreover, the lack of reproducible methodology for creating pulse flow simulation devices using available and inexpensive materials is worth noting. AIM: To develop a hydraulic circuit to simulate pulse blood flow in a tissue-mimicking aortic phantom. METHODS: A literature analysis of existing pulse flow simulation devices and tissue-mimicking phantoms of the abdominal aorta was conducted. The medical and technical requirements for the designed device were formulated. The control circuit was developed, the circuit element base was determined, and the hydraulic circuit prototype was assembled. Based on a literature review, a material suitable for reproducing the biomechanical characteristics of arterial tissue was selected. A simplified phantom of the abdominal aortic segment was made. The device model included a simplified abdominal aortic phantom, a control system, a pump, a pressure sensor, a flow meter, and a flow regulator. Initial testing of the developed circuit in the basic signal mode and in the real flow profile simulation mode was performed. The basic signals were periodic rectangular signals reproduced at different frequencies, simulating normal, rapid, and slow heart rate. Using pulse-width modulation, a profile of the pressure pulse wave was obtained. RESULTS: The developed hydraulic circuit allowed successful reproduction of pressure and flow velocity profiles in a tissue-mimicking aortic phantom. Further development of the project will involve fabrication and validation of the circuit (using anthropomorphic versions of the phantom) and simulation of the angiographic study. CONCLUSIONS: The results may be useful for the improvement of CTA techniques and the development of angiosurgical training stands.

Low background, pulsatile, in vitro flow circuit for modeling coronary implant thrombosis

In-Vitro Investigation of Flow Profiles in Arteries Using the Photoplethysmograph

A Real-Time Programmable Pulsatile Flow Pump for In Vitro Cardiovascular Experimentation

Cardiac-like flow generator for long-term imaging of endothelial cell responses to circulatory pulsatile flow at microscale.

A Fibrin-Thrombin Based In Vitro Perfusion System to Study Flow-Related Prosthetic Heart Valves Thrombosis

Compound Ex Vivo and in Silico Method for Hemodynamic Analysis of Stented Arteries

Exploratory Simulation of Thrombosis in a Temporary LVAD Catheter Pump within a Virtual In-vivo Left Heart Environment

Development of a large diameter in vitro flow loop thrombogenicity test system

A two-phase flow approach for modeling blood stasis and estimating the thrombosis potential of a ventricular assist device

Tortuosity-powered microfluidic device for assessment of thrombosis and antithrombotic therapy in whole blood

A High Performance Pulsatile Pump for Aortic Flow Experiments in 3-Dimensional Models

In vitro flow analysis of a patient-specific intraatrial total cavopulmonary connection

Applications of a novel reciprocating positive displacement pump in the simulation of pulsatile arterial blood flow

Dynamics of Transcatheter Heart Valves with an in Vitro Experiment Incorporating Particle Image Velocimetry

Computational Fluid Dynamics Analysis and PIV Validation of a Bionic Vortex Flow Pulsatile LVAD.

Novel Simulation Model with Pulsatile Flow System for Microvascular Training, Research, and Improving Patient Surgical Outcomes

Development of a High-Fidelity Benchtop Model for Simultaneous Flow, Pressure, and Imaging Assessment of Transarterial Embolization Procedures

In-vitro Major Arterial Cardiovascular Simulator to generate Benchmark Data Sets for in-silico Model Validation

Hydraulic circuit for pulse flow simulation in the tissue-mimicking aortic phantom

Transitional turbulent flow in a stenosed coronary artery with a physiological pulsatile flow

Fluid Dynamic Characterization of Transcatheter Aortic Valves Using Particle Image Velocimetry