Abstract:Portland cement reacts with water to form an amorphous paste through a chemical reaction called hydration. In concrete the formation of pastes causes the mix to harden and gain strength to form a rock-like mass. Within this process lies the key to a remarkable peculiarity of concrete: it is plastic and soft when newly mixed, strong and durable when hardened. These qualities explain why one material, concrete, can build skyscrapers, bridges, sidewalks and superhighways, houses, and dams. The character of the concrete is determined by the quality of the paste. Creep and shrinkage of concrete specimens occur during the loss and gain of water from cement paste. To better understand the role of water in mature concrete, a series of quasielastic neutron scattering (QENS) experiments were carried out on cement pastes with water/cement ratio varying between 0.32 and 0.6. The samples were cured for about 28 days in sealed containers so that the initial water content would not change. These experiments were carried out with an actual sample of Portland cement rather than with the components of cement studied by other workers. The QENS spectra differentiated between three different water interactions: water that was chemically bound into the cement paste, the physically bound or "glassy water" that interacted with the surface of the gel pores in the paste, and unbound water molecules that are confined within the larger capillary pores of cement paste. The dynamics of the "glassy" and "unboud" water in an extended time scale, from a hundred picoseconds to a few nanoseconds, could be clearly differentiated from the data. While the observed motions on the picosecond time scale are mainly stochastic reorientations of the water molecules, the dynamics observed on the nanosecond range can be attributed to long-range diffusion. Diffusive motion was characterized by diffusion constants in the range of (0.6-2) 10(-9) m(2)/s, with significant reduction compared to the rate of diffusion for bulk water. This reduction of the water diffusion is discussed in terms of the interaction of the water with the calcium silicate gel and the ions present in the pore water.

Use of oscillatory shear to study flow behavior of fresh cement paste

Small amplitude oscillatory shear technique to evaluate structural build-up of cement paste

Fresh Cement as a Frictional Non-Brownian Suspension

Critical strain measurements of hydrating Portland cement pastes: A new understanding of microstructure development

Rheometric and ultrasonic investigations of viscoelastic properties of fresh Portland cement pastes

Discrepancies in dynamic yield stress measurements of cement pastes

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Deformation capacity of fresh cement pastes

Rheological Behaviors of Fresh Cement Pastes with Polycarboxylate Superplasticizer

Rheo-viscoelastic Behavior and Viscosity Prediction of Calcium Sulphoaluminate Modified Portland Cement Pastes

Rheology and Yield Stress Evolution of Highly Flowable Cementitious Grouting Materials: Mechanisms and Modeling

Effect of coarse particle volume fraction on the yield stress and thixotropy of cementitious materials

Yield stress of aerated cement paste

Simple Three-Step Analytical Scheme for Prediction of Elastic Moduli of Hardened Cement Paste

In-situ Measurement of Viscoelastic Properties of Fresh Cement Paste by a Microrheology Analyzer

On the measurement of evolution of structural build-up of cement paste with time by static yield stress test vs. small amplitude oscillatory shear test

Rheology and Thixotropy of Cement Pastes Containing Polyacrylamide

Water dynamics in hardened ordinary Portland cement paste or concrete: from quasielastic neutron scattering

Assessing strain rate sensitivity of cement paste at the micro-scale through micro-cantilever testing

The Slump Flow of Cementitious Pastes: Simulation vs. Experiments

Particle Distribution Characteristics and Hydration Mechanism of Cement-Based Paste Subjected to Mechanical Vibrations