Abstract:Residual stress is the main factor affecting the processing performance and service life of brazed diamond tools. Due to the high melting point of Ni-Cr filler alloy, the difference in thermal expansion coefficient between diamond and brazing layer is large during high brazing temperature, and excessive residual stress tends to be generated at the brazed joint. The existing process parameters are difficult to meet the demand for the lower residual stress under high brazing temperature. Suppressing effectively excessive residual stress has become the focus of current researches for process optimization of brazed diamond. In this paper, the conventional spherical finite element model of diamond is replaced by a six-octahedral finite element model of diamond, and a 3D finite element model of brazed diamond is established. The effects of brazing temperature, brazing layer thickness and holding time on the residual stresses in brazed diamond are analyzed. The results show that higher brazing temperatures result in larger differences in thermal expansion coefficients between the diamond and brazing layer, resulting in larger residual stress. The higher brazing layer thickness will enlarge the stress affected area inside diamond and thus generate higher stress. The residual stress decreases with rising holding time, however, the subsequent thermal damage to the diamond increases. Experimental measured tendency of residual stress for brazed diamond through Raman spectroscopy is well consistent with that of calculated results. After observing of the surface morphology for brazed diamond through super-depth of field microscope, the brazed diamond presents the low residual stress, weak graphitization and excellent processing performance at the condition of brazing temperature of 1010 °C, brazing layer thickness of 0.3 mm and holding time of 5 min.

Research on laser brazing diamond coating process based on temperature field finite element simulation and machine learning

Numerical Simulation of Temperature Characteristics and Graphitization Mechanism of Diamond in Laser Powder Bed Fusion

Finite element analysis and experimental verification of residual stress in brazed diamond with Ni-Cr filler alloy

Analysis of Temperature Field for Laser Assisted Mechanical Dressing and Truing of Diamond Grinding Wheel

Temperature Field Simulation and Experimental Analysis of Laser Cladding 45 Steel.

Modeling of the temperature field in nanosecond pulsed laser ablation of single crystalline diamond

A Locally Boron-Doped Diamond Tool for Self-Sensing of Cutting Temperature: Lower Thermal Capacity and Broader Applications

Influence of Laser Scanning Speed on the Formation Property of Laser Brazing Diamond Coating

Characterization and Optimization of a Locally Boron-Doped Diamond Tool for Self-sensing of Cutting Temperature

Laser Power Effects on Properties of Laser Brazing Diamond Coating

Investigation of temperature field for the in-situ fabrication of particle-reinforced alumina ceramics coating via laser induction

Numerical Simulation of the Laser Welding Process for Diamond Saw Blades

Effect of Cu-coated diamond on the formation of Cu–Sn-based diamond composites fabricated by laser-powder bed fusion

Temperature Field Simulation On Ti6a14v And Incone1718 Heated By Continuous Infrared Laser

Temperature Field Numerical Calculation of Laser Re-melting HVOF Sprayed Cr3C2-25％ CrNi Coatings and Experiment Test

Improving the accuracy and reliability of temperature field simulation during laser metal deposition

Research on Interface Structure and Performance of Diamond Brazed Coating Based on Non-Vacuum Environment

A thermal field FEM of titanium alloy coating on low-carbon steel by laser cladding with experimental validation

Thermal analysis of in-situ laser assisted diamond cutting of fused silica and process optimization

Phase-field modeling of selective laser brazing of diamond grits

Simulation and Experimental Study on Temperature Fields for Laser Assisted Machining of Silicon Nitride