Abstract:Plasma-facing materials and components in a fusion reactor are the interface between the plasma and the material part. The operational conditions in this environment are probably the most challenging parameters for any material: high power loads and large particle and neutron fluxes are simultaneously impinging at their surfaces. To realize fusion in a tokamak or stellarator reactor, given the proven geometries and technological solutions, requires an improvement of the thermo-mechanical capabilities of currently available materials. In its first part this article describes the requirements and needs for new, advanced materials for the plasma-facing components. Starting points are capabilities and limitations of tungsten-based alloys and structurally stabilized materials. Furthermore, material requirements from the fusion-specific loading scenarios of a divertor in a water-cooled configuration are described, defining directions for the material development. Finally, safety requirements for a fusion reactor with its specific accident scenarios and their potential environmental impact lead to the definition of inherently passive materials, avoiding release of radioactive material through intrinsic material properties. The second part of this article demonstrates current material development lines answering the fusion-specific requirements for high heat flux materials. New composite materials, in particular fiber-reinforced and laminated structures, as well as mechanically alloyed tungsten materials, allow the extension of the thermo-mechanical operation space towards regions of extreme steady-state and transient loads. Self-passivating tungsten alloys, demonstrating favorable tungsten-like plasma-wall interaction behavior under normal operation conditions, are an intrinsic solution to otherwise catastrophic consequences of loss-of-coolant and air ingress events in a fusion reactor. Permeation barrier layers avoid the escape of tritium into structural and cooling materials, thereby minimizing the release of tritium under normal operation conditions. Finally, solutions for the unique bonding requirements of dissimilar material used in a fusion reactor are demonstrated by describing the current status and prospects of functionally graded materials.

A review of recent developments in atomic processes for divertors and edge plasmas

Plasma performance enhancement and impurity control by novel technique of argon-hydrogen mixture fueled glow discharge wall conditioning in ADITYA-U tokamak

From pulsed power to processing: Plasma initiated chemical process intensification

Current Status and Prospects of Burning Plasma Physics in Confined Fusion

Analytic Criteria for Power Exhaust in Divertors due to Impurity Radiation

Deuterium–tritium Plasmas in Novel Regimes in the Tokamak Fusion Test Reactor

Progress of Divertor Heat and Particle Flux Control in EAST for Advanced Steady-State Operation in the Last 10 Years

Overview of advances in ASDEX Upgrade plasma control to support critical physics research for ITER and beyond

Focus on plasma-facing materials in nuclear fusion reactors

Atomic models of dense plasmas, applications and current challenges

Impact of divertor neutral pressure on confinement degradation of advanced tokamak scenarios at ASDEX Upgrade

Stable Deuterium-Tritium plasmas with improved confinement in the presence of energetic-ion instabilities

Challenges for plasma-facing components in nuclear fusion

A Long-Pulse Small Edge-Localized-mode High-Confinement Plasma with Detachment Feedback Control by Floating Potential in an Experimental Advanced Superconducting Tokamak in a Metal Wall Environment

Stable Deuterium-Tritium burning plasmas with improved confinement in the presence of energetic-ion instabilities

Effects of Low Energy and High Flux Helium/Hydrogen Plasma Irradiation on Tungsten As Plasma Facing Material

Impurity behaviour in JET high-current baseline scenario for Deuterium, Tritium and Deuterium-Tritium plasmas

An improved understanding of the roles of atomic processes and power balance in divertor target ion current loss during detachment

A Monte-Carlo model of neutral-particle transport in diverted plasmas

Development of advanced high heat flux and plasma-facing materials

Energy-selective confinement of fusion-born alpha particles during internal relaxations in a tokamak plasma