Abstract:In this study mechanical properties and texture of powder metallurgy FeCoCrNiN0.07 HEA sheets were studied at cold-rolled and different annealed conditions. The results show that the sheets at the cold-rolled (CR) condition and annealed state at 500 °C (anneal-500) exhibit obvious anisotropy of mechanical properties and the strength along the rolling direction is lower than that in the 90° direction. This mechanical anisotropy reduces significantly in the sheet after annealing at 750 °C (anneal-750). The main texture components are F {111} <112>, Goss {110} <001>, G/B {110} <115> and E {111} <110> texture for the CR condition, and F {111} <112>, Goss {110} <001>, Brass {110} <112> and E {111} <110> texture for the anneal-500 condition, respectively. The mechanical property anisotropy of the FeCoCrNiN0.07 sheet could be well explained by the equivalent Schmid factors (ηsD) which are calculated by weighting the maximum Schmid factors (ηsmax) for different texture components along different loading directions using their volume fractions. The equivalent Schmid factors of CR and anneal-500 sheets in the 0° (rolling direction), 45° (an angle of 45° to the rolling direction) and 90° (perpendicular to the rolling direction) directions gradually decreased in order, which fits well with that the strengths in the 0°, 45° and 90° directions gradually increased in sequence. The anneal-750 sheet has undergone significant recrystallization and the anisotropy of mechanical properties is greatly reduced consequently.

Effect of thermal history on the short-range order in Fe-Cr alloys

Inversion of the Sign of the Short-Range Order as a Function of the Composition of Fe–Cr Alloys at Warm Severe Plastic Deformation and Electron Irradiation

Comprehensive analysis of ordering in CoCrNi and CrNi2 alloys

The Effect of Chemical Short-Range Order on Incipient Plastic Behavior in FCC Structured High Entropy Alloys

Effect of Annealing on the Curie Temperature in the Bulk Amorphous Alloys

Short-range order effects on the thermodynamic behavior of Al CoCrFeNi high-entropy alloys

First-principles study of atomic ordering in fcc Ni-Cr alloys

The effect of short-range order on mechanical properties of high entropy alloy Al0.3CoCrFeNi

Structure, short-range order, and phase stability of the Al x CrFeCoNi high-entropy alloy: insights from a perturbative, DFT-based analysis

Short-range order formation in Fe-Co alloys: NMR study and first-principles calculations

Effect of low-temperature transverse field annealing on domain structure and soft magnetism of Fe53-xCo7Ni20Si4B16Crx (x = 0, 1, 2, 3) amorphous alloys

Structure, short-range order, and phase stability of the Al$_x$CrFeCoNi high-entropy alloy: Insights from a perturbative, DFT-based analysis

Effects of Annealing on Hardness, Yield Strength and Dislocation Structure in Single Crystals of the Equiatomic Cr-Mn-Fe-Co-Ni High Entropy Alloy

Anomalies in the short-range local environment and atomic diffusion in single crystalline equiatomic CrMnFeCoNi high-entropy alloy

The impact of chemical short-range order on the thermophysical properties of medium- and high-entropy alloys

Annealing Effects and Short-Range Ordering in the Non-Magnetostrictive Amorphous Alloy Co 58 Ni 10 Fe 5 Si 11 B 16

Investigating Effect of Ordering on Magnetic-Elastic Property of FeNiCoCr Medium-Entropy Alloy

Order-Disorder Transition and Curie Transition in Ni70fe30 Nanoalloy

Effect of annealing temperature on anisotropy of mechanical properties in powder metallurgy FeCoCrNiN0.07 high-entropy alloy sheets

Effect of annealing temperature on the structure and properties of FeCoCrNiMo high-entropy alloy

Effect of partial substitution of iso-valent Mo at Cr-site on electronic structure and physical properties of Fe2CrAl