Abstract:In this paper, a generic uniform scallop tool path generation method for five-axis machining is presented. Unlike the conventional methods which are based on the local surface geometry assumptions, this method is inspired by cutting simulation. Initially, the designed surface is planted with dense grasses. If a cutter is put onto the surface, the affected grasses will be cut short. All the affected grasses form a grass ring on the surface. When the cutter moves along the previous tool path, the envelope of the grass rings will form a machining band. Based on the machining band, cutter contact points can be found on the surface to ensure that the cutting edge touches exactly on the side of the band. These cutter contact points are fitted to construct the next tool path. In this way, all the tool paths can be generated recursively. An optimization is also developed to improve the computing efficiency of the path generation process. The proposed uniform scallop tool path generation method is generic. It can be popularized to (1) any kind of end mill with various sizes, (2) any kind of parametric surface and (3) directional- or contour-parallel tool path topologies. Another salient feature of this method is that it is free of local surface geometry assumptions, so the obtained tool paths are more precise. The proposed method is implemented and evaluated with several freeform surface examples. The feasibility of the method is also verified by actual cutting experiment.

Geometric simulation of locally optimal tool paths in three-axis milling

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Optimal Cutting Directions by Considering the Dynamic Mismatch Between Feed Axes of Machine Tools

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

On Initialization of Milling Paths for 5-Axis Flank CNC Machining of Free-Form Surfaces with General Milling Tools

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

Expanding Development of End-Milling Tool Path Through Geometric Simulation

Tool Path Optimisation for Flank Milling Ruled Surface Based on the Distance Function

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

Tool Path Generation Algorithm for Five-axis NC Machining with a Toroidal Cutter

Exploratory Study of Spiral Nc Tool Path Generation on Triangular Mesh Based on Local Subdivision

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

A Tool Path Optimization System for Three-Axis Milling Process Based on Geometric and Physical Simulation

Collision-free Tool Motion Planning for 5-Axis CNC Machining with Toroidal Cutters

Smooth tool path generation for five-axis flank milling using multi-objective programming

Geometric Deviation Reduction Method for Interpolated Toolpath in Five-Axis Flank Milling of the S-shaped Test Piece

Cutter Shape Determination and Tool Path Generation in CNC Flank Milling

Global Optimization of Tool Path for Five-Axis Flank Milling with a Cylindrical Cutter

A Method of Generating Spiral Tool Path for Direct Three-Axis Computer Numerical Control Machining of Measured Cloud of Point