Abstract:A comprehensive quantum transport study of ultrathin-body silicon double-gate pMOSFETs with gate length <inline-formula> <tex-math notation="LaTeX">${L}_{\textsf {g}}= \textsf {14}$ </tex-math></inline-formula>, 10, and 7 nm is performed by in-house developed nonequilibrium Green’s function solver employing the six-band <inline-formula> <tex-math notation="LaTeX">${k} \cdot {p}$ </tex-math></inline-formula> Hamiltonian. The effects of channel length, body thickness, as well as confinement and transport crystal orientations are studied systematically. Both <inline-formula> <tex-math notation="LaTeX">${I}$ </tex-math></inline-formula>–<inline-formula> <tex-math notation="LaTeX">${V}$ </tex-math></inline-formula> and <inline-formula> <tex-math notation="LaTeX">${C}$ </tex-math></inline-formula>–<inline-formula> <tex-math notation="LaTeX">${V}$ </tex-math></inline-formula> characteristics are analyzed in this paper. Furthermore, the CMOS performance benchmarking results, such as switching delay, energy consumption, and their product, are calculated with the influence of parasitic resistances and capacitances treated in an appropriate way. It is found that the crystal orientation effect on drive current is significant at both long and short channel lengths, while its effect on effective capacitance is more observable at <inline-formula> <tex-math notation="LaTeX">${L}_{\textsf {g}} = \textsf {7}$ </tex-math></inline-formula> nm. The drive current at <inline-formula> <tex-math notation="LaTeX">${L}_{\textsf {g}} = \textsf {14}$ </tex-math></inline-formula> nm and <inline-formula> <tex-math notation="LaTeX">${L}_{\textsf {g}} = \textsf {7}$ </tex-math></inline-formula> nm can be well explained by average ballistic hole velocity and source-to-drain tunneling ratio, respectively. Meanwhile, the effective capacitance is not only determined by the density of states but also affected by the distribution of holes in the confined direction. Both intrinsic and extrinsic performance assessments suggest that (001)/[100] and (110)/[001] are the optimal confinement/transport crystal orientation configurations at <inline-formula> <tex-math notation="LaTeX">${L}_{\textsf {g}}= \textsf {7}$ </tex-math></inline-formula> nm, while <inline-formula> <tex-math notation="LaTeX">${(}\textsf {110}{)}/[\overline {1}\textsf {10}]$ </tex-math></inline-formula> and <inline-formula> <tex-math notation="LaTeX">${(}\textsf {110})/[\overline {1}\textsf {11}]$ </tex-math></inline-formula> are the best choices at longer gate lengths. As <inline-formula> <tex-math notation="LaTeX">${L}_{\textsf {g}}$ </tex-math></inline-formula> shrinks, both intrinsic and extrinsic performances will be better at a scaled body thickness.

Large Thermoelectric Power Factor in P-type Si (110)/[110] Ultra-Thin-Layers Compared to Differently Oriented Channels

Experimental identification of critical condition for drastically enhancing thermoelectric power factor of two-dimensional layered materials

Current transport and thermoelectric properties of very high power factor Fe3O4 / SiO2 / p-type Si (001) devices

Potential thermoelectric candidate monolayer silicon diphosphide (SiP2) from a first-principles calculation

The influence of non-idealities on the thermoelectric power factor of nanostructured superlattices

Mitigating the Effect of Nanoscale Porosity on Thermoelectric Power Factor of Si

High Thermoelectric Power Factor of P-Type Amorphous Silicon Thin Films Dispersed with Ultrafine Silicon Nanocrystals

Unraveling High Thermal Conductivity with In-Plane Anisotropy Observed in Suspended SiP2

Lattice Plainification Leads to High Thermoelectric Performance of P-Type PbSe Crystals

Pd$_{2}$Se$_{3}$ Monolayer: A Promising Two Dimensional Thermoelectric Material with Ultralow Lattice Thermal Conductivity and High Power Factor

Ultra-low lattice thermal conductivity induces high-performance thermoelectricity in Janus group-VIA binary monolayers: A comparative investigation

High Thermoelectric Performance of Intrinsic Few-Layers T-Hfse2

Bipolar conduction asymmetries lead to ultra-high thermoelectric power factor

Realizing high thermoelectric performance in p-type Si 1-x-y Ge x Sn y thin films at ambient temperature by Sn modulation doping

Very high thermoelectric power factor in a Fe3O4/SiO2/p-type Si(100)heterostructure

Giant thermoelectric effect governed by unique two-dimensional electronic structure and strong anharmonicity in layered nitrides

Reinforcement of power factor in N-type multiphase thin film of Si 1−x−y Ge x Sn y by mitigating the opposing behavior of Seebeck coefficient and electrical conductivity

Analysis of Thermoelectric Properties of Scaled Silicon Nanowires Using an Atomistic Tight-Binding Model

Ultrahigh Power Factors in P-type 1T-Zrx2 (X = S, Se) Single Layers.

Large increase of the thermoelectric power factor in multi-barrier nanodevices