Abstract:The use of the simple Hertz model for the analysis of Atomic Force Microscopy (AFM) force-distance curves measured on soft spherical cell-like particles leads to significant underestimations of the objects Young's modulus E. To correct this error, a mixed double contact model (based on the simple Hertz model and the Johnson-Kendall-Roberts (JKR) model) was derived. The model considers two independent particle deformation sites: (i) the upper part of the particle is deformed by the AFM indenter, (ii) the bottom part is deformed by the substrate, which is usually unnoticed. It becomes apparent that for soft particles even small forces between substrate and particle can influence the resulting force-distance curves. For instance we show, that a gravity-induced compression on the particle bottom side can have significant influence on the measurements. To highlight these observations, the deviation of the particle Young's modulus E between the simple Hertz model and our model is calculated. This error strongly depends on the ratio of the three involved radii: (i) the radius of the AFM indenter, (ii) the radius of the particle and (iii) the radius of the substrate as well as on the acting gravity force. Overall, the analysis suggests that for nanoscopic indenters the deviation is negligible, whereas the use of microscopic indenters results in significant errors that can be corrected via the presented model. This is important especially for very soft particles, since larger indenters can achieve higher signal to noise ratios. Furthermore, the applicability of the model was confirmed by indentation experiments on hydrogel microbeads. The mixed double contact model is applicable to a large range of indenter geometries and can be adapted for other contact models.

Contact angles on a soft solid: from Young's law to Neumann's law

Static wetting on deformable substrates, from liquids to soft solids

Spreading on viscoelastic solids: Are contact angles selected by Neumann's law?

Contact lines on soft solids with uniform surface tension: analytical solutions and double transition for increasing deformability

Capillary Pressure and Contact Line Force on a Soft Solid

Contact angles on heterogeneous surfaces; a new look at Cassie's and Wenzel's laws

STUDY ON A MECHANICAL EQUILIBRIUM CONDITION AT A THREE-PHASE CONTACT LINE: WETTABILITY ON SOLID SURFACES

Discussion on Young's Equation Based on Interfacial Jump Condition

Macroscopic Wettability Based on an Interfacial Jump Condition.

Straight contact lines on a soft, incompressible solid

Deformation of an elastic substrate due to a resting sessile droplet

Discussion on a Mechanical Equilibrium Condition of a Sessile Drop on a Smooth Solid Surface

Simple relations for wettability of a droplet on a low-surface-energy solid

Finite deformations govern the anisotropic shear-induced area reduction of soft elastic contacts

The Deformation of an Elastic Substrate by a Three-Phase Contact Line

Micro/Nanocontact Between a Rigid Ellipsoid and an Elastic Substrate with Surface Tension

Soft lubrication: the elastohydrodynamics of non-conforming and conforming contacts

Finite-element analysis of contact between elastic self-affine surfaces

Equilibrium Contact Angles and Dewetting in Capillaries

A novel contact model for AFM indentation experiments on soft spherical cell-like particles.

Nanoscale fluid structure of liquid-solid-vapour contact lines for a wide range of contact angles