Fringe field simulations of a non-scaling FFAG accelerator

George I. Bell,Dan T. Abell
DOI: https://doi.org/10.48550/arXiv.1202.0805
2012-02-04
Abstract:Fixed-field Alternating Gradient (FFAG) accelerators offer the potential of high-quality, moderate energy ion beams at low cost. Modeling of these structures is challenging with conventional beam tracking codes because of the large radial excursions of the beam and the significance of fringe field effects. Numerous tune resonances are crossed during the acceleration, which would lead to beam instability and loss in a storage ring. In a non-scaling FFAG, the hope is that these resonances can be crossed sufficiently rapidly to prevent beam loss. Simulations are required to see if this is indeed the case. Here we simulate a non-scaling FFAG which accelerates protons from 31 to 250 MeV. We assume only that the bending magnets have mid-plane symmetry, with specified vertical bending field in the mid-plane (y=0). The magnetic field can be obtained everywhere using a power series expansion, and we develop mathematical tools for calculating this expansion to arbitrary order when the longitudinal field profile is given by an Enge function. We compare the use of a conventional hard-edge fringe with a more accurate, soft-edge fringe field model. The tune 1/3 resonance is the strongest, and crossing it in the hard-edge fringe model results in a 21% loss of the beam. Using the soft-edge fringe model the beam loss is less than 6%.
Accelerator Physics
What problem does this paper attempt to address?
### Problems the paper attempts to solve The paper aims to solve the problem of simulating the fringe - field effects in non - scaling fixed - field alternating - gradient (non - scaling FFAG) accelerators. Specifically, FFAG accelerators offer the potential to obtain high - quality, medium - energy ion beams at a relatively low cost. However, due to the large radial offset of the beam and the significance of the fringe - field effects, it is very challenging to model these structures using traditional beam - tracking codes. #### Key issues include: 1. **Fringe - field effects**: During the acceleration process, the beam will experience many tune resonances, which may lead to beam instability and loss. Especially in non - scaling FFAG, it is hoped that these resonances can be traversed quickly enough to prevent beam loss. 2. **Simulation accuracy**: To verify this, simulations need to be carried out, especially to compare the effects of the hard - edge and soft - edge fringe - field models. #### Specific research content: - The author simulated a non - scaling FFAG accelerator for protons accelerating from 31 MeV to 250 MeV. - It is assumed that the bending magnet has a vertical bending field in the mid - plane (y = 0), and the magnetic field in the entire space is calculated by a power - series expansion. - The traditional hard - edge fringe - field model was compared with the more accurate soft - edge fringe - field model, especially in terms of performance when traversing the 1/3 tune resonance. #### Main findings: - Using the hard - edge fringe - field model, the beam loss reached 21% when traversing the 1/3 tune resonance. - Using the soft - edge fringe - field model, the beam loss was less than 6%. ### Summary Through detailed simulation research, this paper demonstrates the importance of correctly modeling the fringe - field for predicting the performance of non - scaling FFAG accelerators. Although the speed of particle tracking using the new field mapping and soft - edge magnets is about 10 times slower than that of the traditional hard - edge model, the additional computation time far exceeds the possible redesign cost after the machine is built. Moreover, considering that only 626 turns need to be tracked instead of millions of turns in a storage ring, the tracking time can still be easily managed. --- If you have more questions or need further explanation, please feel free to let us know!