Abstract:Groundwater is the most important and valuable water resource in arid and semi-arid regions. Nevertheless, the high salinity of these resources remains the major constraint. To remedy this problem, the present study aims to investigate and develop a novel sustainable solar desalination technology. A passive and active single slope solar still, combined with phase change material (PCM) for the thermal energy storage system, have been numerically modeled and simulated. The active system has been made by coupling passive solar still with a parabolic trough collector (PTC) via a heat exchanger, as an external heat source. For each desalination system, a flat absorber and others with corrugated surfaces (rectangular, triangular, and spherical) were tested to compare their performances and the effect of absorber shape on both passive and active systems. Conservation equations of the two models were solved using Comsol Multiphysics software. Simulation results showed that for the passive system the corrugated surface with rectangular ripples increases pure water productivity by 109% and 42% by comparison with the conventional distiller, and the distiller with an absorber of flatform with storage system, respectively. Furthermore, it was revealed that solar still integrated with PTC and modified by different absorber geometry has higher freshwater productivity of 15.39 and 15.01 kg/m2/day compared to 2.37 and 2.11 kg/m2/day for the passive still by using rectangular and spherical absorbers respectively. Consequently, the percentage improvement of the developed active system is about 549.36% and 611.37% respectively. From this investigation, it is observed that the passive solar still with rectangular absorber is the most suitable for household use; however, by coupling PTC to the modified passive solar still with rectangular absorber configuration, we have the appropriate design for industrial applications such as hospitals, irrigation processes for agricultural greenhouses in arid and semi arid regions.

Assessment of solar distillers with cement layer and cement cylinder fins as low-cost and locally available thermal storage materials

Experimental comparison investigation on the performance analysis of desert crystal sand roses and sand grain as natural effective heat storage materials in conical solar distillers: 4E and sustainability analyses

Energy, exergy, and economic analysis of solar still using coal cylinder fins: an experimental study

Enhanced water production in hemispherical solar stills via solar collector and thermal storage integration: experimental validation

Evaluation of solar distiller performance using steel wool pads, internal reflectors, and woven wire mesh: economic, environmental, and sustainability analysis

Performance assessment of a novel solar distiller with a fountain-shaped basin design embedded with phase change materials enriched with copper oxide nano-additives: A detailed experimental investigation

An experimental exploration of modified basin solar still performance through integration of flat plate collector and built condenser

Sustainable and clean water distillation by parabolic dish collector and different heat absorber and thermal storage materials: An experimental study

Overcoming shading challenges in solar distillers: A comparative study of copper conical fins and sand-filled fins

3E analysis of enhancing solar distillation performance through innovative wick convex stepped absorber, PCM, and evacuated tube solar water collector: Experimental investigation

Innovative integration: Enhancing solar distillation efficiency with modified spherical solar stills

Optimizing cord pyramid solar distillers: A comprehensive study on square baffles, reflectors, and phase transition materials

Experimental investigation on dish solar distiller with modified absorber and phase change material under various operating conditions

Investigating the performance of dish solar distiller with phase change material mixed with Al2O3 nanoparticles under different water depths

Machine learning-based prediction and augmentation of dish solar distiller performance using an innovative convex stepped absorber and phase change material with nanoadditives

Numerical simulation of the performance of passive and active solar still with corrugated absorber surface as heat storage medium for sustainable solar desalination technology

Innovation of Solar Desalination System Coupled with Solar Collector: Experimental Study

CFD simulation of modified solar still for effective condensation and evaporation: energy and exergy analysis

Advancing solar distillation efficiency through calcium hydroxide coating and enhanced configuration of mirror-assisted system

Experimental Analysis and CFD Modeling for Conventional Basin-Type Solar Still

Improving the yield of fresh water in conventional solar still using low cost energy storage material