Abstract:Copper alloys have long been regarded as important cultural heritage metals artifacts. They are still widely used in a variety of industries today. Nonetheless, copper alloys can corrode in harsh environments containing chloride salt. Organic inhibitors are used to suppress the corrosion of copper alloys, and the use of green inhibitors is preferred due to environmental considerations. This study focuses on the corrosion protection of copper alloy in 0.6 M of sodium chloride solution in absence and presence of various concentrations of fresh inner leave gel (FILG) of Aloe vera barbadensis as a green inhibitor at room temperature (RT). The research methodology applies some methods to do the study, such as open circuit potential, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS), Scanning electron microscopy-Energy dispersive X-ray analysis (SEM-EDX), and quantum chemical calculations (QCC). Increased inhibitor concentrations resulted in high inhibition efficiency. Electrochemical polarization exhibits around 99.9 % inhibitory efficiency (IE) at a concentration of 200 ppm. It is found that as the concentration increases to 500 ppm, the IE decreases but the protective efficiency remains good. This behavior might be due to the reverse action of the protective film formed on the surface by the accumulation of the inhibitor molecules. Electrochemical measurements show shifting of the corrosion potential to more positive potential. This behavior indicates the formation of protective film on the copper alloy surface. The high IE of the FILG green inhibitor is due to the presence of various functional groups. These functional groups enhance the protective film formation and hinder the effective electron transfer rate at the interface. The QCC reveals that the FILG inhibitor's high IE is due to the increasing dipole moment and low energy gap of polarizable organic molecules. This facilitates the electron transfer between organic molecules and the copper alloy surface, enhancing the formation of protective film.

The anti-corrosion performance of chaya leaf extracts on pure Mg substrates in Ringer ́s solution

Chrysophyllum Albidum extract as a new and green protective agent for metal

Enhancing corrosion resistance of magnesium alloys via combining green chicory extracts and metal cations as organic-inorganic composite inhibitor

Enhancing corrosion resistance of biodegradable magnesium with dicalcium phosphate dihydrate and Chlorella sp. biomass

Combined atomic-scale/DFT-theoretical simulations & electrochemical assessments of the chamomile flower extract as a green corrosion inhibitor for mild steel in HCl solution

Orange peel extracts as biodegradable corrosion inhibitor for magnesium alloy in NaCl solution: Experimental and theoretical studies

Exploration of natural polymers for use as green corrosion inhibitors for AZ31 magnesium alloy in saline environment

Experimental and computational aspects of green corrosion inhibition for low carbon steel in HCl environment using extract of Chamaerops humilis fruit waste

Chitosan-ImH@γ-CD: a pH-sensitive smart bio-coating to enhance the corrosion resistance of magnesium alloys in bio-implants

Hybrid Sol-Gel Coatings Doped with Non-Toxic Corrosion Inhibitors for Corrosion Protection on AZ61 Magnesium Alloy

Anticorrosive properties of chitosan-derivatives coatings on Mg AZ31 alloy in Hank's Balanced Salt Solution

Insight into the Corrosion Inhibition Performance of Pistia stratiotes Leaf Extract as a Novel Eco-Friendly Corrosion Inhibitor for Mild Steel in 1 M HCl Solution

Insight into the anti–corrosion behavior of Reineckia Carnea leaves extract as an eco–friendly and high–efficiency corrosion inhibitor

Corrosion inhibition of copper alloy of archaeological artifacts in chloride salt solution using Aloe vera green inhibitor

Alkaloid extract of seed Citrullus colocynthis as novel green inhibitor for mild steel corrosion in one molar HCl acid solution: DFT and MC/MD approaches

Electrochemical evaluation of the anti-corrosion potential of selected amino acids on magnesium in aqueous sodium chloride solutions

Electrochemical, Structural and Thermodynamic Investigations of Methanolic Parsley Extract as a Green Corrosion Inhibitor for C37 Steel in HCl

Chitosan and Its Derivatives as a Barrier Anti-Corrosive Coating of 304 Stainless Steel against Corrosion in 3.5% Sodium Chloride Solution

Effect of solvent acids on the microstructure and corrosion resistance of chitosan films on MAO-treated AZ31B magnesium alloy

Anti-corrosion performance of a new silane coating for corrosion protection of AZ31 magnesium alloy in Hank's solution

Investigating the Inhibitory Effect of Sargassum natans and Sargassum fluitans Extracts on Iron Corrosion in 1.00 mol L−1 HCl Solution