Abstract:Abstract Many aircraft are inherently over-actuated with regard to their input variables. This can be particularly advantageous in the context of unmanned aerial vehicles (UAV), where actuator functions can fail in critical situations. In such cases, the redundant actuators can be used to further fulfil the control strategies used and thus increase the operational safety. Within such an active fault-tolerant control system, a fault detection and isolation (FDI) module is required. To evaluate such safety–critical systems, hardware-in-the-loop simulations (HIL) are a necessary step prior to real flight tests. These simulations can verify the correct implementation of the flight controller on the target hardware as well as the real-time capability of the algorithms used. Particularly in the context of active fault-tolerant control, investigations concerning the robustness of the used FDI module with regard to real, noisy sensor signals, which can be generated by a HIL demonstrator, are of utter importance. This paper presents the development of a HIL demonstrator for the validation of fault-tolerant control methods for a hybrid UAV. This includes a detailed description of the demonstrator’s design, control and interfacing between the integrated subsystems. As an application example, a hybrid UAV model will be shortly presented, which, in addition to the primary aerodynamic control surfaces, can also use four lift rotors to control the aircraft during cruise and is therefore inherently over-actuated. Finally, a closed-loop real-time simulation of the UAV model on the HIL demonstrator is presented on the basis of the exemplary simulation of an actuator failure and subsequent reconfiguration by the fault-tolerant flight control law.

Hardware In The Loop Simulator in UAV Rapid Development Life Cycle

Design of Hardware-In-Loop Simulation System for Unmanned Aerial Vehicle

Hardware-in-the-Loop Simulation Method for Pico-satellite Attitude Determination and Control System

Correlation of Hardware in the Loop Simulation (HILS) and real control vehicle flight test for reducing flight failures

Development of a hardware-in-the-loop demonstrator for the validation of fault-tolerant control methods for a hybrid UAV

Design and Hardware-in-the-loop Simulation of MUAV's Flight Control System

A hardware-in-the-loop simulation platform for distributed UAV swarms

Design and Test of Hardware-in-the-loop Platform for Vehicle Chassis CAN System with Intermittent Open and Short Connection Faults

Hardware-in-the-loop Real-Time Platform for More Electric Aircraft

Hardware-in-the-loop Simulation Platform for Unmanned Aerial Vehicle Swarm System: Architecture and Application

Design, implementation and verification of hardware-in-the-loop control system for work-class ROVs

Software- and hardware-in-the-loop verification of flight dynamics model and flight control simulation of a fixed-wing unmanned aerial vehicle

PaTAVTT: A Hardware-in-the-Loop Scaled Platform for Testing Autonomous Vehicle Trajectory Tracking

Hardware-in-the-loop simulator for research on fault tolerant control of electrohydraulic actuators in a flight control application

AUTONOMOUS FLIGHT CONTROL AND HARDWARE-IN-THE-LOOP SIMULATOR FOR A SMALL HELICOPTER

Design and implementation of hardware in the loop simulation for electric ducted fan rocket control system using 8-bit microcontroller and real-time open source middleware

Development of a hardware-in-loop attitude control simulator for a CubeSat satellite

Hardware-in-the-loop Simulation of Flight Mach Fuzzy Controller.

Hardware-in-the-Loop for Characterization of Embedded State Estimation for Flying Microrobots

Research on Damage Analysis of Key Parts of UAV Flight Control System

State of the art: hardware in the loop modeling and simulation with its applications in design, development and implementation of system and control software