Abstract:The manuscript entitled "Numerical study on purge characteristics and purge strategy for PEMFC hydrogen system based on exhaust hydrogen recirculation" is prepared by Ben Chen, Yang Liu, Wenshang Chen, Changqing Du, Jun Shen and Zhengkai Tu. The lumped parameter model of hydrogen system and the CFD model of PEMFC stack is established to study the purge characteristics purge strategy. The voltage fluctuation range of unit cell decreases gradually from inlet to outlet during anode purging. The purge strategy with short period‐short duration was beneficial to reduce the fluctuation of the stack performance and reduce the differences of component distribution.SummaryThe lumped parameter model of the hydrogen system based on exhaust hydrogen recirculation and the CFD model of PEMFC stack were established in this paper. The system simulation results were used as the input of the stack model. The purge characteristics of the stack were studied and the purge strategy was formulated considering the hydrogen utilization and performance characteristics. The results show that during anode purging, the anode pressure fluctuated significantly and the nitrogen concentration decreased rapidly. The output voltage of the stack fluctuates greatly, and the fluctuation of voltage intensifies with the extension of emission duration. In addition, the voltage fluctuation range of unit cell decreases gradually from inlet to outlet. After the system stabilizes, the component distribution of anode was improved and the stack performance was recovered to the initial state. During the purge interval, the performance of the stack degrades due to the increase of anode nitrogen concentration. The hydrogen utilization rate of the hydrogen system was directly related to the purge strategy, and the purge strategy of short period‐short duration was beneficial to reduce the fluctuation of the stack performance in the purging process, and reduce the differences of performance and component distribution of different single cell.

Numerical study on purge characteristics and purge strategy for PEMFC hydrogen system based on exhaust hydrogen recirculation

An Effective PEMFC System Shutdown Purge Strategy for Improving the Purging Effect of Liquid Water and the Dehydration of Stack

Numerical Simulation on Gas Purge After Shutdown in Proton Exchange Membrane Fuel Cell

Anode purge management for hydrogen utilization and stack durability improvement of PEM fuel cell systems

Experimental study on the influence of operating conditions on performance decline with periodic anode purges in a vehicular PEMFC stack

Numerical simulation on purge strategy of proton exchange membrane fuel cell with dead-ended anode

Purge strategy analysis of proton exchange membrane fuel cells based on experiments and comprehensive evaluation method

Experimental Investigation Of Gas Purge And Voltage Undershoot For An Air-Breathing Pemfc

Modeling Study of Anode Water Flooding and Gas Purge for PEMFCs

Optimization of purge strategy under fuel cell startup conditions based on CFD-Simulink collaborative simulation

Two-Dimensional simulation of purge processes for dead-ended H 2 /O 2 proton exchange membrane fuel cell

Analysis and control strategy design for PEMFC purging process

Experimental Study on the Effect of Flow Channel Parameters on the Durability of PEMFC Stack and Analysis of Hydrogen Crossover Mechanism

Experimental Study on the Purge Process of a Proton Exchange Membrane Fuel Cell Stack with a Dead-End Anode

Purge Strategy for PEM Fuel Cells Considering Economy and Durability

Exhaust purification system for 5 kW fuel cell system under simulated driving cycle

A dynamic voltage model of a fuel cell stack considering the effects of hydrogen purge operation

Stack shut-down strategy optimisation of proton exchange membrane fuel cell with the segment stack technology

The Dynamic Behavior of Pressure During Purge Process in the Anode of A Pem Fuel Cell

Construction of Nitrogen Content Observer for Fuel Cell Hydrogen Circuit Based on Anode Recirculation Mode

A novel gas supply configuration for hydrogen utilization improvement in a multi-stack air-cooling PEMFC system with dead-ended anode