Abstract:The uncertainty on the laminar flame speed extracted from spherically expanding flames can be minimized by using large flame radius data for the extrapolation to zero stretch-rate. However, at large radii, the hydrodynamic and thermo-diffusive instabilities would induce the wrinkling of the flame surface and limit the range of usable data. In the present study, we have employed the flame stability theory of Matalon to tailor the properties of the initial mixture so that onset of cellular flame would occur at a pre-determined, large radius. This approach was employed to measure the laminar flame speeds of H2/O2/N2/He mixtures with equivalence ratios from 0.6 to 2.0, at pressures of 50/80/100 kPa and initial temperature of 300 K. For most experiments we performed, the uncertainty related to the extrapolation to zero stretch-rate (performed with the linear curvature model) was below 2% as shown by the position of the data points in the (Lb/Rf,U, Lb/Rf,L) plan, where Lb is the burned Markstein length; and Rf,L and Rf,U are the flame radii at the lower and upper bounds of the extrapolation range. Unsteady 1-D simulations using four chemical mechanisms were performed to show that unstretched laminar flame speed can be well-characterized with relative error below 10% for most conditions. The flame dynamical response to stretch rate could be captured by the mechanisms only under some conditions. Further analyses on critical flame radius were carried out: (i) the dominant parameters were identified based on a local sensitivity analysis; and (ii) the uncertainty on the predicted critical radius was determined through an uncertainty propagation approach. Uncertainty in critical flame radius calculation comes mostly from the uncertainty on fundamental transport and kinetic data. The present work indicates that although the stability theory of Matalon provides a well defined framework to tailor the mixture properties for improved flame speed measurement, the inaccuracy of some of the required parameters can result in significantly over-estimated critical radius for cellular flame onset which compromises the accuracy of the tailoring procedure.

Determination of the regression rate of a fast moving solid/liquid interface using ultrasonics

Measurement of jet gas–liquid interface fluctuations based on ultrasonic scattering

Measurement of the Thermal Transport Properties of Dielectric Thin Films Using the Micro-Raman Method

Contemporary methods to measure regression rate of energetic materials: A review

A tracer-free photographic method for the estimation of the velocity field in a liquid metal pool

Morphological stability of solid-liquid interfaces under additive manufacturing conditions

Experimental study on the collision behaviors of micron-sized aluminum droplets with solid wall in high temperature burned gas

A high-temperature acoustic field measurement and analysis system for determining cavitation intensity in ultrasonically solidified metallic alloys

In situ measurement of austenite grain growth and recrystallization using laser ultrasonics

Assessment of Weld Microstructure Through Sound Velocity Measurements for Power Plant Applications

Experimental and theoretical study of metal combustion in oxygen flows

A liquid metal diffusion measurement technique integrating the x-ray radiography and multi-slice sliding cell

Power Consumption and Friction Coefficient in the Ultrasonic Consolidation of Aluminium Alloys

Experimental investigation on the measurement performance of high-speed ultrasonic wave thermometry in ambient- and high-temperature environments

Estimation of spatio-temporal temperature evolution during laser spot melting using in-situ dynamic x-ray radiography

Tailored Mixture Properties for Accurate Laminar Flame Speed Measurement from Spherically Expanding Flames: Application to H2/O2/N<…

Measurement of temperature-dependent diffusion coefficients using a confocal Raman microscope with microfluidic chips considering laser-induced heating effect.

Development of the Multichannel Pulsed Ultrasonic Doppler Velocimeter for the measurement of liquid metal flow

Revealing Internal Flow Behaviour in Arc Welding and Additive Manufacturing of Metals

Ultrasonic thermometric measurement system for solid rocket combustion chambers