Flowfield of a helicopter submerged inlet with power output shaft
He-Xia Huang,Hui-Jun Tan,Zheng-Kang Lin,Zi-Jie Li,Shu Sun,Hao Chen,Zhi-Xiang Xiao
DOI: https://doi.org/10.1007/s10409-020-01029-z
IF: 3.5
2021-01-01
Acta Mechanica Sinica
Abstract:The submerged inlet is an attractive configuration for advanced helicopters due to its high stealth performance and low external drag. In this paper, a submerged inlet, integrated with a ROBIN helicopter fuselage and a simplified power output shaft, is experimentally and numerically investigated to obtain the basic flow characteristics under a freestream velocity of 23.6 m/s. The results indicate that the pylon ahead of the inlet induces a horseshoe vortex. Though the vortex is ingested into the inlet, it has little effect on the internal flows and can be neglected. When the airflow enters into the inlet, it interacts with the shaft with a large incidence angle, yielding a vortex pair. At the leeside of the shaft, the two side flows of the shaft impinge at the center plane, generating a local high-pressure region at the azimuthal angle of 180°, which forces the boundary layer to roll up a counter-rotating vortex pair. In addition, the airflow adjacent to the cowl lip accelerates rapidly, resulting in a local low-pressure region at the azimuthal angle of 0°. Therefore, the inlet duct has a strong circumferential pressure gradient, which originates from an azimuthal angle of 180° to 0° and induces a vortex pair at the azimuthal angle of 0°. The three vortex pairs are the main origins of the distortion at the duct exit plane, among which the one near the cowl lip with the azimuthal angle of 0° plays the dominant role. Additionally, as the velocity ratio increases from 3.9 to 5.5, the circumferential pressure gradient and the cowl lip vortex get intensified, which causes that the total-pressure recovery coefficient drops by 0.5% and the distortion index increases by 28%.
engineering, mechanical,mechanics