Abstract:Gas turbine combustors design nowadays is aimed at achieving extremely lower NOx emissions through involving more air into the combustor to perform lean combustion, which results in the reduction of cooling air ratio for the liner walls. In this context, effusion cooling, one of the most effective cooling strategies, is adopted on the liner for its advantages of providing well cooling protection with limited amount of air. The swirl flow structure generated by the injector to stabilize flame in most modern lean-burn combustor is very complex with recirculation and vortex breakdown. So the interaction between three dimensional main flow and jets issued from the effusion holes is significant when assessing effusion cooling performance on the liner. In the present work, detailed effusion cooling feature on both inner and outer liners of a scaled annular combustor equipped with three axial swirlers has been provided under non-reactive and reactive conditions. The main flow is electrically heated for the non-reactive condition, while premixed combustion is realized after methane is fueled into the injectors and mixed with the air in the surrounding passage for the reactive condition. Temperature distribution on the target bended plate with 7 rows of discrete cooling holes in an in-line layout is captured by infrared thermography, and the cooling effectiveness is then analyzed. Effects of coolant to mainstream flow rate ratio and equivalence ratio are evaluated respectively. Results show that the macro rotational flow generated by the swirl flows interacts with cooling film and leads to non-symmetric cooling protection circumferentially on both liners. Additionally, averaged cooling effectiveness is found to increase with the flow rate ratio. At reactive conditions, stagnation of the high temperature swirl flow impinging on the liner wall locates at X/D range of 0.4–0.5, which has not been observed at non-reactive conditions. Also cooling effectiveness results indicate that outer liner obtains better cooling protection than inner liner when reaction is activated. Finally, the effect of most interested parameter for combustion process equivalence ratio is surveyed at Φ=0.7, 0.8 and 0.9. With experimental results, the importance of the combustion is highlighted in weighing the effusion cooling performance on the real annular combustor liners, which can’t be predicted comprehensively by non-reactive investigations. To obtain more knowledge of this issue, future work concerned with the flow field and flame visualization needs to be done through experimental techniques and numerical methods.

Numerical study of steady flow characteristics of a rear variable-area bypass injector with alternating area regulator

Investigations of entrainment characteristics and shear-layer vortices evolution in an axisymmetric rear variable area bypass injector

The Effect of Swirling Injector Geometry on the Flow Dynamics of Precessing Vortex Core

Development and Validation of a Novel Control-Volume Model for the Injection Flow in a Variable Cycle Engine

Performance Prediction Method for Forward Variable Area Bypass Injector of Variable Cycle Engine Based on Numerical Simulation

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Numerical Simulation for Effects of Venturi Tube on Swirling Flow Field

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Numerical Simulation of Effects of Venturi Tube Throat Diameter on Flow Field of Combustor

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Experimental and numerical study on flow mixing and combustion characteristics of a novel multibypass integrated combustor

Numerical Simulations and Optimization of a Micro Annular Combustor

Numerical Investigation on Mechanism of Swirling Flow of the Prefilming Air-Blast Fuel Injector

Study on effects of inlet nonuniformities on aerothermal performance of NGV pressure side with different film cooling designs

Impact of Predicted Combustor Outlet Conditions on the Aerothermal Performance of Film-Cooled HPT Vanes

Experimental investigation of pressure losses in a co-rotating cavity with radial inflow employing tubed vortex reducers with varied nozzles

Numerical Investigation of the Aerodynamic Performance Affected by Spiral Inlet and Outlet in a Positive Displacement Blower

Mixing and combustion augmentation of the RBCC with different mixer configurations in ejector mode

Parametric study on mixing augmentation mechanism induced by cantilevered ramp injectors in a shock-induced combustion ramjet engine

Experimental Investigation of Effusion Cooling Performance on the Liner of A Scaled Three Injector Annular Combustor

Experimental and Numerical Investigation of a Novel Vortex Reducer in a Co-Rotating Cavity of Aeroengines