Abstract:F-P (Fabry-Perot) pressure sensors have a wide range of potential applications in high-temperature, high-pressure, and high-dynamic environments. However, existing demodulation methods commonly rely on spectrometers, which limits their application to high-frequency pressure signal acquisition. To solve this problem, this study developed a self-compensated, three-wavelength demodulation system composite with an F-P pressure sensor and a thermocouple to construct a comprehensive sensing system. The system produces accurate pressure measurements in high-temperature, high-pressure, and high-dynamic environments. In static testing at room temperature, the sensing system shows excellent linearity, and the pressure sensitivity is 158.48 nm/MPa. In high-temperature testing, the sensing system maintains high linearity in the range of 100 °C to 700 °C, with a maximum pressure-indication error of about 0.13 MPa (0~5 MPa). In dynamic testing, the sensor exhibits good response characteristics at 1000 Hz and 5000 Hz sinusoidal pressure frequencies, with a signal-to-noise ratio (SNR) greater than 37 dB and 45 dB, respectively. These results indicate that the sensing system proposed in this study has significant competitive advantages in the field of high-temperature, high-speed, and high-precision pressure measurements and provides an important experimental basis and theoretical support for technological progress in related fields.

Fast-Response Sensitivity-Enhanced All-Fiber Fabry–Pérot High-Pressure Sensor for Internal Combustion Engines

Fast-response High-temperature All-fiber Fabry-Perot Dynamic Pressure Sensor for Internal Combustion Engine

A Sensitivity-enhanced All-fiber Fabry-Perot High-pressure Sensor with a Hard-core Diaphragm

Single Optical Microfiber Enabled Tactile Sensor for Simultaneous Temperature and Pressure Measurement

A Large-Range and High-Sensitivity Fiber-Optic Fabry–Perot Pressure Sensor Based on a Membrane-Hole-Base Structure

A MEMS-Based High-Fineness Fiber-Optic Fabry–Perot Pressure Sensor for High-Temperature Application

MEMS Fabry-Perot sensor for accurate high pressure measurement up to 10?MPa

Highly Sensitive Optical Fiber Pressure SensorBased on FPI and Vernier Effect via FemtosecondLaser Plane-by-Plane Writing Technology

Double F-P Interference Optical Fiber High Temperature Gas Pressure Sensor Based on Suspended Core Fiber

Hybrid Fiber Optic Sensor, Based on the Fabry–Perot Interference, Assisted with Fluorescent Material for the Simultaneous Measurement of Temperature and Pressure

A High-Sensitivity Fiber-optic Fabry-Perot Gas Pressure Sensor with Epoxy Resin Adhesive

All-sapphire fiber-optic sensor for the simultaneous measurement of ultra-high temperature and high pressure

Simple Fiber-Optic Sensor for Simultaneous and Sensitive Measurement of High Pressure and High Temperature Based on the Silica Capillary Tube

In-line Fabry-Perot sensors based on hollow-core photonic bandgap fibers for high temperature applications

High temperature and high pressure fiber microsphere Fabry–Perot sensor based on Vernier effect and FBG

Novel High-Temperature Fiber-Optic Pressure Sensor Based on Etched Pcf F-P Interferometer Micromachined by A 157-Nm Laser

Performance Study of F-P Pressure Sensor Based on Three-Wavelength Demodulation: High-Temperature, High-Pressure, and High-Dynamic Measurements

High-Consistency Optical Fiber Fabry–Perot Pressure Sensor Based on Silicon MEMS Technology for High Temperature Environment

Multimode fiber tip Fabry-Perot cavity for highly sensitive pressure measurement

PDMS diaphragm based miniature fiber-optic Fabry–Perot dynamic pressure sensor for turbomachinery application

Miniature High-Frequency Response, High- Pressure -Range Dynamic Pressure Sensor Based on All-Silica Optical Fiber Fabry-Perot Cavity