Abstract:The growth of a plasma electrolytic oxide (PEO) coating on Al was widely considered as an ejection of molten alumina on the surface, induced by a localized breakdown of the solid coating. However, evidences presented here indicated no breakdown of the insulating coating in the PEO process, based on the X-ray diffraction, scanning electron microscopy, transmission electron microscopy and energy dispersive spectrometry investigations. There are abundant channels in the coating layer from surface to substrate. However, the SEM observes indicating that the channels in the outer layer with a low-density distribution and a micron-sized diameter, the channels extending into the internal layer with a high-density distribution and a nano-sized diameter. In addition, a continuous thin amorphous alumina layer (AAL) was found between coating and substrate. An intermediate state of the AAL before transition to crystalline, with unusually thick character (∼2.7μm), is reported for the first time, which presented a typical cross-sectional characteristic of the ionic migration processes. Based on these microstructure observations, a growth mechanism is proposed here to explain the structural features, in which the discharge ignited in the gas-filled channels passing through both the outer layer and the internal layer. The main voltage drop of applying the hole sample loaded on the AAL at a magnitude of ∼1V·nm-1 due to excellent conductivity of discharge plasmas in the channels. Under a high electrical field, the AAL was thickening, ultimately squeezing the coating expanding outward. Abundant moving micro-discharges and localized expansions could result in the growth of the whole coating.

Behavior of ZnO-coated alumina dielectric barrier discharge in atmospheric pressure air

A Mechanism for the Growth of a Plasma Electrolytic Oxide Coating on Al

Study of Dielectric Barrier Townsend Discharge in Air at Atmospheric Pressure

Homogeneous Dielectric Barrier Discharges in Atmospheric Air and Its Influencing Factor

Townsend Dielectric Barrier Discharge in Atmospheric Pressure Air

Effect of Atmospheric Dielectric Barrier Discharge on Optical, Electrical and Surface Properties of ZnO Film

Emission Spectroscopy and Energy Transfer Process in Atmospheric Dielectric Barrier Discharge in Oxygen

Comparisons of discharge characteristics of a dielectric barrier discharge with different electrode structures

Comprehensive study on discharge characteristics in pulsed dielectric barrier discharges with atmospheric He and CO2

Study of Homogeneous DBD with Fine Wire Meshes and PET Films in Air at Atmospheric Pressure

Electrical Modeling of Dielectric Barrier Discharge Considering Surface Charge on the Plasma Modified Material

Deposition of Thin Titania Films by Dielectric Barrier Discharge

Corrosion Behavior of ZnO-reinforced Coating on Aluminum Alloy Prepared by Plasma Electrolytic Oxidation

A Comparative Study of Water Electrodes Versus Metal Electrodes for Excitation of Nanosecond-Pulse Homogeneous Dielectric Barrier Discharge in Open Air

Optical and Electrical Characteristics of Air Dielectric Barrier Discharges in Mode Transition at Atmospheric Pressure

Numerical simulation of air DBD under standard atmospheric pressure

Effect Of Surface Charge Trapping On Dielectric Barrier Discharge

Simulation Study on the Mechanism of Wire– Cylinder Air Dielectric Barrier Discharge Under Atmospheric Pressure

Study of Characteristics of Coplanar Dielectric Barrier Discharge

Study of ozone generation in an atmospheric dielectric barrier discharge reactor

Electrochemical Behavior of Zinc Oxide and Zinc-based Composite Oxide Films