Abstract:In order to offer higher average brightness and more stable photon beam, top-up injection mode is scheduled for daily operation in SSRF. Several critical beam parameters, such as filling pattern, average current, beam lifetime and transfer efficiency, need to be measured precisely and reliably, and few interlock logics need to be added into machine protection system with top-up mode. Several hardware and software optimizations of beam instrumentation for this purpose will be introduced in this paper. OVERVIEW Shanghai Synchrotron Radiation Facility (SSRF) is a third generation light source, which located at Shanghai, P.R. China. Since December 2012, SSRF has operated in top-up mode for user experiments, which was a milestone of SSRF in facility performance improvements. The topup injections are made continuously at the time interval of about 10 minutes. Each injection cycle takes about 10 seconds and the bunch change uniformity of the 500 bunch train is better than 95%. For the top-up operation, several beam parameters, such as filling pattern, average current, beam lifetime and transfer efficiency, need to be measured precisely. Some extra interlock logics were added into machine protection system. This paper will introduce the details of hardware and software optimizations of beam instrumentation for the purpose above. FILLING PATTERN Bunch charge uniformity control is very important for the top-up operation. The quality mainly depends on the precision of bunch charge & filling pattern measurement. This measurement can be realized by direct sampling BPM pickup signal [1-3] or synchrotron radiation signal [4]. Due to easy configuration and good linearity button, BPM pickups and PXI waveform digitizer based solution have been adopted [5].

RF gymnastics in synchrotrons

Beam Instrumentation System Optimization for Top-up Operation in SSRF

Experimental Study Using Touschek Lifetime As Machine Status Flag in SSRF

Beam instrumentation system development and commissioning in ssrf

Experimental Study of Synchro-Betatron Coupling Induced by Dipole Modulation

Research on Longitudinal Dynamics and Design of RF Parameters of Synchrotron for XiPAF-upgrading Project

Radio-Frequency (RF) Systems

Experimental Determination of the Hamiltonian for Synchrotron Motion with Rf Phase Modulation

Basics of RF electronics

Introduction to Non-linear Longitudinal Beam Dynamics

Longitudinal dynamics with RF phase modulation in the LNLS electron storage ring

Longitudinal Splitting of Bunches with Variable Energies in Synchrotron

Design and performance of LLRF system for CSNS/RCS

High dimensional characterization of the longitudinal phase space formed in a radio frequency quadrupole

Project X with Rapid Cycling and Dual Storage Superconducting Synchrotrons

Bunch-by-bunch Beam Transverse Feedback Electronics Designed for SSRF

Synchrotron radiation of crystallized beams

RF-driven modification of phase space distribution

The proton deuteron rf system for the Berkeley Synchrocyclotron.

Frequency and Length Adjustment of A PEFP Low-Beta Dumbbell

Electron beam emittance at operational intensity in fourth-generation synchrotron light sources