Abstract:We present a novel, power- & hardware-efficient, multiuser, multibeam RIS (Reflective Intelligent Surface) architecture for multiuser MIMO, especially for very high frequency bands (e.g., high mmWave and sub-THz), where channels are typically sparse in the beamspace and LOS is the dominant component. The key module is formed by an active multiantenna feeder (AMAF) with a small number of active antennas, placed in the near field of a RIS with a much larger number of passive controllable reflecting elements. We propose a pragmatic approach to obtain a steerable beam with high gain and very low sidelobes. Then K independently controlled beams can be achieved by closely stacking K such AMAF-RIS modules. Our analysis includes the mutual interference between the modules and the fact that, due to the delay difference of propagation through the AMAF-RIS structure, the resulting channel matrix is frequency selective even for pure LOS propagation. We consider a 3D geometry and show that "beam focusing" is in fact possible (and much more effective in terms of coverage) also in the far-field, by creating spotbeams with limited footprint both in angle and in range. Our results show that: 1) simple RF beamforming (BF) without computationally expensive baseband multiuser precoding is sufficient to practically eliminate multiuser interference when the users are chosen with sufficient angular/range separation, thanks to the extremely low sidelobe beams; 2) the impact of beam pointing errors with standard deviation as large as 2.5 deg and RIS quantized phase-shifters with quantization bits > 2 is essentially negligible; 3) The proposed architecture is more power efficient & much simpler from a hardware implementation viewpoint than standard active arrays with the same BF performance. We show also that the array gain of the proposed AMAF-RIS structure is linear with the RIS aperture.

Single-User Beamforming in Large-Scale MISO Systems with Per-Antenna Constant-Envelope Constraints: The Doughnut Channel

Robust Secure Beamforming Design for Multi-RIS-Aided MISO Systems with Hardware Impairments and Channel Uncertainties

A Robust Deep Learning-Based Beamforming Design for RIS-Assisted Multiuser MISO Communications with Practical Constraints

Robust Beamforming Designs for Multiuser MISO Downlink with Per-Antenna Power Constraints

Adaptive Orthonormal Random Beamforming For Cellular Downlink With Multiple Antennas

Low-Complexity Pareto-Optimal 3D Beamforming for the Full-Dimensional Multi-User Massive MIMO Downlink

Multiuser Beamforming for Partially-Connected Millimeter Wave Massive MIMO

WLC09-6: Adaptive Orthonormal Random Beamforming for Cellular Downlink with Multiple Antennas

Coordinated Beamforming with Artificial Noise for Secure SWIPT under Non-Linear EH Model: Centralized and Distributed Designs

Large System Analysis of Base Station Cooperation for Power Minimization

Exploiting Channel Hardening and Sphere Hardening for Large Antenna Arrays

Transmit beamforming for MIMO multicast channels

Energy Efficient Beamforming for Massive MIMO Public Channel

Secure Communications in Near-Filed ISCAP Systems with Extremely Large-Scale Antenna Arrays

Random Beamforming with Multi-beam Selection for MIMO Broadcast Channels

Analog-Only Beamforming for Near-Field Multiuser MIMO Communications

Performance Analysis of Optimal Single Stream Beamforming in MIMO Dual-Hop AF Systems

Beamforming Algorithm for Multiuser Wideband Millimeter-Wave Systems with Hybrid and Subarray Architectures

Optimal Discrete Spatial Compression for Beamspace Massive MIMO Signals.

A Robust Beamforming with Antenna Selection Approach for Dense Antenna Arrays under Limited CSI

A New Old Idea: Beam-Steering Reflectarrays for Efficient Sub-THz Multiuser MIMO