Abstract:The heat transfer and solidification characteristics significantly affect the solidified microstructure of direct laser deposited coatings. In this work, a Ti-based coating was prepared on the Ti811 alloy by coaxial laser cladding to reveal the in-situ synthesis mechanism of the reinforcing phase and enhance its mechanical properties. The heat transfer evolution and solidification characteristics of the molten pool were investigated by numerical simulations and experiments. The phase composition, microstructure, interface characteristics, nano-hardness, and tribological properties of the deposited coating were studied. The results showed that the sufficient temperature of the molten pool ensured the formation of a deposited coating. The Marangoni convection of the molten pool facilitated the powder particles melting process as well as the uniformity of the reinforcing phase distribution. In addition, the temperature gradient and solidification rate at the upper of the solidified interface increased 2.27 and 29 times, respectively, compared to those at the bottom of the solidified interface. Thermodynamic and simulation results determined the precipitation sequence and mechanism of the phases. Due to the solid solution strengthening, dispersion strengthening effects, and robust interfacial bonding between phases, the nano-hardness of the deposited coating was 2.5 times higher than the substrate. Compared to the Ti811 alloy, the friction coefficient of the coating was reduced by around 30%. The tribological properties of the deposited coating dramatically improved, and the wear mechanism was mainly abrasive wear. This work theoretically and experimentally revealed the primary mechanism of in-situ enhancement to protect titanium alloys.

Enhanced surface composite coating on Ti811 alloy by laser cladding towards improved nano-hardness

Optimization of microstructure and properties of composite coatings by laser cladding on titanium alloy

In situ TiC/Ti2Ni reinforced CrTi4-based composites during laser cladding

Research on microstructure and properties of Ti-based coating prepared by laser cladding on titanium alloy: simulation and experiment

Study on fabrication of multi-phase reinforcement coatings on Ti6Al4V by laser cladding for enhanced tribological performance

In situ Ti 2 Ni/Ti 2 S reinforced Ti-based composites with enhanced mechanical properties fabricated by laser cladding on TC4 alloy

Microstructure and element distribution of laser cladding TiC -reinforced CrTi4-based composite coating with CeO2/Ce2O3

Microstructures and Properties of Laser Cladding Al-TiC-CeO₂ Composite Coatings

Microstructure and properties of pure titanium coating on Ti-6Al-4V alloy by laser cladding

Research on Microstructure Properties of the TiC/Ni-Fe-Al Coating Prepared by Laser Cladding Technology

Microstructure and wear resistance of laser clad composite coating on TC4 titanium alloy surface

Microstructure and properties of Ti–Al–C composite coatings prepared by laser cladding

Synthesis of Y2O3 particle enhanced Ni/TiC composite on TC4 Ti alloy by laser cladding

Microstructure Characteristics and Properties of In-Situ Formed Tic/Ni Based Alloy Composite Coating by Laser Cladding

Microstructure and Mechanical Properties of a Ti-6Al-4V Titanium Alloy Subjected to Laser Cladding

Microstructure regulation and performance of titanium alloy coating with Ni interlayer on the surface of mild steel by laser cladding

Microstructure and wear properties of TiCN/Ti coatings on titanium alloy by laser cladding

Laser Synthesis of Titanium Aluminides Matrix Composite Coatings Reinforced by In-Situ Titanium Carbide Particles on Ti-6Al-4V Substrate

Study of Fe-Ni(Cr) Alloy and Nano-Al2o3 Particles Composite Coating Prepared by Laser Cladding

Microstructure characteristics of titanium aluminide matrix composite coatings made by laser cladding on titanium alloy substrate

In-Situ Synthetic Tib2 Particulate Reinforced Metal Matrix Composite Coating on Aa2024 Aluminum Alloy by Laser Cladding Technology