Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Verification, Validation and Testing of Kinetic Mechanisms of Hydrogen Combustion in Fluid Dynamic Computations

Modeling of Hydrogen Combustion from a 0D/1D Analysis to Complete 3D-CFD Engine Simulations

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

Ignition in Nonpremixed Counterflowing Hydrogen Versus Heated Air: Computational Study with Detailed Chemistry

Optimizing Hydrogen Kinetics for Zero-Carbon Emission Transport Technologies

Numerical Simulation of Hydrogen Combustion: Global Reaction Model and Validation

Optimization of Kinetic Mechanism for Hydrogen Combustion Based on Machine Learning

Hydrogen, methane and one of their fuel blends combustion: CFD analysis and numerical-experimental comparisons of fixed and mobile applications

On the Development of Detailed and Reduced Reaction Mechanisms for Combustion Modeling

Ignition Kinetics in Fuels Oxidation

Evaluation of Chemical Kinetic Mechanisms for Methane Combustion: A Review from a CFD Perspective

Chemical Kinetic Analysis of High-Pressure Hydrogen Ignition and Combustion toward Green Aviation

Chemical Kinetics and Aerodynamics of Ignition

Structural analysis of combustion mechanisms

Assessment of H2-CH4-air Mixtures Oxidation Kinetic Models Used in Combustion

A Bayesian approach to calibrating hydrogen flame kinetics using many experiments and parameters

Simulation and Analysis of Hydrogen-fueled Engine Combustion

Numerical Simulation of Gasoline Stratified Charge Compression Ignition Using 3D-CFD Coupled with Detailed Chemistry

Modeling of a Reduced Hybrid H2–Air Kinetic Scheme Integrating the Effect of Hypersonic Reactive Air with Supersonic Combustion

Reduced Kinetic Model for Complex Turbulent n-Heptane Flame Simulations

A dynamic adaptive chemistry scheme with error control for combustion modeling with a large detailed mechanism