Abstract:Front-end polarization modulation enables improved polarization measurement stability by modulating the targeted signal above the low-frequency $1/f$ drifts associated with atmospheric and instrumental instabilities and diminishes the impact of instrumental polarization. In this work, we present the design and characterization of a new 60-cm diameter Reflective Half-Wave Plate (RHWP) polarization modulator for the 90 GHz band telescope of the Cosmology Large Angular Scale Surveyor (CLASS) project. The RHWP consists of an array of parallel wires (diameter $50~\mathrm{\mu m}$, $175~\mathrm{\mu m}$ pitch) positioned $0.88~\mathrm{mm}$ from an aluminum mirror. In lab tests, it was confirmed that the wire resonance frequency ($f_\mathrm{res}$) profile is consistent with the target, $139~\mathrm{Hz}<f_\mathrm{res}<154~\mathrm{Hz}$ in the optically active region (diameter smaller than $150~\mathrm{mm}$), preventing the wire vibration during operation and reducing the RHWP deformation under the wire tension. The mirror tilt relative to the rotating axis was controlled to be $<15''$, corresponding to an increase in beam width due to beam smearing of $<0.6''$, negligible compared to the beam's full-width half-maximum of $36'$. The median and 16/84th percentile of the wire--mirror separation residual was $0.048^{+0.013}_{-0.014}~\mathrm{mm}$ in the optically active region, achieving a modulation efficiency $\epsilon=96.2_{+0.5}^{-0.4}\%$ with an estimated bandpass of 34 GHz. The angular velocity of the RHWP was maintained to an accuracy of within $0.005\%$ at the nominal rotation frequency ($2.5~\mathrm{Hz}$). The RHWP has been successfully integrated into the CLASS 90 GHz telescope and started taking data in June 2024, replacing the previous modulator that has been in operation since June 2018.

W-band prototype of platelet feed-horn array for CMB polarisation measurements

Design and performance of wide-band corrugated walls for the BICEP Array detector modules at 30/40 GHz

Silicon-Based Antenna-Coupled Polarization-Sensitive Millimeter-Wave Bolometer Arrays for Cosmic Microwave Background Instruments

A Dual-polarized Broadband Planar Antenna and Channelizing Filter Bank for Millimeter Wavelengths

Design, Uncertainty Analysis and Measurement of a Silicon-based Platelet THz Corrugated Horn

Design and Performance of 30/40 GHz Diplexed Focal Plane for BICEP Array

Design of Corrugated-Horn-Coupled Mkid Focal Plane for Cmb B-Mode Polarization

Commercially fabricated antenna-coupled Transition Edge Sensor bolometer detectors for next generation Cosmic Microwave Background polarimetry experiment

Modelling the radiation pattern of a dual circular polarization system

A Wideband Tightly Coupled Array for Omnidirectional Pattern Synthesis

Double-Flare Angle Bowtie Slot Antenna for Multichroic CMB Polarization Detectors

Development of Lumped Element Kinetic Inductance Detectors for the W-Band

High performance WR-1.5 corrugated horn based on stacked rings

A Laminated Wideband Dual Circularly Polarized Patch Antenna for X-Band Applications

A Circularly Symmetric Antenna Design With High Polarization Purity and Low Spillover

Design and characterization of a 60-cm reflective half-wave plate for the CLASS 90 GHz band telescope

Commercialization of micro-fabrication of antenna-coupled Transition Edge Sensor bolometer detectors for studies of the Cosmic Microwave Background

A Millimeter-wave Circular Polarized Feed for A Reflectarray Antenna

Design and experimental investigation of a planar metamaterial Silicon based lenslet

Next Generation Sub-Millimeter Wave Focal Plane Array Coupling Concepts: an ESA TRP Project to Develop Multichroic Focal Plane Pixels for Future CMB Polarization Experiments

Total power horn-coupled 150 GHz LEKID array for space applications