Abstract:Multi-stable composite laminates are composite materials that exhibit multi-stable states, making them highly suitable for use in morphing structures. These materials are capable of maintaining each stable state without expending any energy. As a result, they are used extensively in numerous applications and garnered the interest of scholars and aerospace organizations. In the context of practical applications, such as morphing structures, it is insufficient for designers to rely solely on common bi-stable composite laminates that exhibit large deformations and medium rotations to achieve their desired objectives. Consequently, based on the objectives of the design, there are two potential resolutions to address this limitation. A designer may utilize mosaic multi-stable composite laminates to achieve a morphing structure that exhibits high flexibility, significant deformation, and substantial rotation. The utilization of a series connection between a bi-stable composite laminate and a symmetric composite laminate results in the formation of a mosaic bi-stable composite laminate with variable stiffness. Furthermore, the amalgamation of two asymmetric composite laminates with inverted orientations engenders a mosaic tri-stable composite laminate. The present research examines the static characteristics of mosaic bi-stable and tri-stable composite laminates. It also seeks to analyze the factors affecting the behavior of these types of laminates. A geometrically exact model was formulated for this objective. Apart from the geometrically exact model, a widely used and uncomplicated model relying on the conventional Classical Laminated-Plate Theory (CLPT) and Von-Karman nonlinear strains was employed. The proposed models were validated through finite element simulations. The system's static equations were derived using the virtual work principle and the Rayleigh-Ritz method. The present study examines and explores quasi-static snap-through behavior between stable states through the application of concentrated forces. The findings indicate a high level of concurrence between the outcomes derived from the geometrically exact model and the finite element analyses, particularly in composite laminates exhibiting significant deformations and rotations.

Geometric modelling of kink banding in laminated structures

Extensible Beam-Like Metastructures at the Microscale: Theoretical and Modified Hencky Bar-Chain Modeling

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

Kink–band formation of fiber reinforced polymer (FRP)

Micro-Mechanical Analysis about Kink Band in Carbon Fiber/Epoxy Composites under Longitudinal Compression

Geometrically nonlinear behaviour of actively twisted and bent plywood

A Non-linear Mean-Field Debonding Model at Large Strains for the Analysis of Fibre Kinking in UD Composites

A comprehensive formulation for determining static characteristics of mosaic multi-stable composite laminates under large deformation and large rotation

Bending instability of a stiff lamella embedded in soft matrix

Buckling and postbuckling analyses of laminated anisotropic structures

Strong-anisotropy-induced instability and discussion on kink band under complex loads

Unraveling kinking: a plasticity enhancing failure mode in high strength nano metallic laminates

Interface-dominated plasticity and kink bands in metallic nanolaminates

Investigation of Plastic Kink-Band in Fiber-Reinforced Composites with Fiber Misalignment Defect

Bidirectional bending of laminated composite plates using an improved zig-zag model

Application of a delamination model to laminated composite structures

A robust and automated method for geometric modelling of thick laminates with multiple and asymmetric ply wrinkles

Mechanical Behavior of the Composite Curved Laminates in Practical Applications

The effects of kinematics on post-buckling analysis of sandwich structures

Assessment of certain higher-order structural models based on global approach for bending analysis of curvilinear composite laminates