Abstract:This paper reports the results of an investigation on combined torsional buckling of multi-walled carbon nanotubes (MWNTs) under combined torque, axial loading and radial pressures based on the continuum mechanics model, which takes into account the effect of the van der Waals interaction between adjacent tubes. A buckling condition is derived for determining the critical buckling torque and associated buckling mode. In particular, for combined torsional buckling of double-walled carbon nanotubes, an explicit expression is obtained and some detailed results are demonstrated. According to the innermost radius-to-thickness ratio, MWNTs are classified into three types: thin, thick, and (almost) solid. Numerical results are worked out for the critical buckling torque and associated buckling mode for all the three types of MWNTs subjected to various axial stresses (axial tensile stresses or axial compressive stresses), internal pressures, and external pressures. It is shown that, the axial tensile stress or the internal pressure will make the MWNTs resist higher critical buckling torque, while the axial compressive stress or external pressure will lead to a lower critical buckling torque. The effect of axial stress (axial tensile stress or axial compressive stress) on the critical buckling torque of MWNTs is very small for all the three types of MWNTs, while the effect of the internal pressure or external pressure is related to the types of MWNTs, which is strong for the thin MWNTs, moderate for the thick MWNTs, and small for the solid MWNTs. Numerical results also indicate that, the associated buckling mode is unique and dependent on the structure of MWNTs. Especially, for combined torsional buckling of MWNTs with very small axial stress and radial pressures, the buckling mode is just the one for the corresponding pure torsional buckling.

Axial Stiffness of Multiwalled Carbon Nanotubes

The Intrinsic Stiffness of Single-Wall Carbon Nanotubes

Coupled Thermomechanics Of Single-Wall Carbon Nanotubes

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Transverse vibrations of double-walled carbon nanotubes under compressive axial load

Can a Single-Wall Carbon Nanotube Be Modeled As a Thin Shell?

The Very‐Low Shear Modulus of Multi‐Walled Carbon Nanotubes Determined Simultaneously with the Axial Young's Modulus Via in Situ Experiments

Atomistic Simulation of the Torsion Deformation of Carbon Nanotubes

Exceptionally high Young's modulus observed for individual carbon nanotubes

Eccentric Compression Stability of Multi-Walled Carbon Nanotubes Embedded in an Elastic Matrix

The effective modulus of super carbon nanotubes predicted by molecular structure mechanics.

Stiffness and Thickness of Boron-Nitride Nanotubes

Torsional Buckling of Multi-Walled Carbon Nanotubes Subjected to Torsional Loads

A Continuum Model for Axial-Strain-Induced Torsion in Single-Wall Carbon Nanotubes

Tensile and bending properties of double-walled carbon nanotubes

Stability of multi-walled carbon nanotubes under combined bending and axial compression loading

Buckling of Embedded Multi-Walled Carbon Nanotubes under Combined Torsion and Axial Loading

Combined Torsional Buckling of Multi-Walled Carbon Nanotubes Coupling with Axial Loading and Radial Pressures

Thickness of Graphene and Single-Wall Carbon Nanotubes

Bending Stability of Multiwalled Carbon Nanotubes

Radial Breathing Vibration of Multiwall Carbon Nanotubes Based on A Rigorous Van Der Waals Interaction