Abstract:This paper reports the results of an investigation on combined torsional buckling of multi-walled carbon nanotubes (MWNTs) under combined torque, axial loading and radial pressures based on the continuum mechanics model, which takes into account the effect of the van der Waals interaction between adjacent tubes. A buckling condition is derived for determining the critical buckling torque and associated buckling mode. In particular, for combined torsional buckling of double-walled carbon nanotubes, an explicit expression is obtained and some detailed results are demonstrated. According to the innermost radius-to-thickness ratio, MWNTs are classified into three types: thin, thick, and (almost) solid. Numerical results are worked out for the critical buckling torque and associated buckling mode for all the three types of MWNTs subjected to various axial stresses (axial tensile stresses or axial compressive stresses), internal pressures, and external pressures. It is shown that, the axial tensile stress or the internal pressure will make the MWNTs resist higher critical buckling torque, while the axial compressive stress or external pressure will lead to a lower critical buckling torque. The effect of axial stress (axial tensile stress or axial compressive stress) on the critical buckling torque of MWNTs is very small for all the three types of MWNTs, while the effect of the internal pressure or external pressure is related to the types of MWNTs, which is strong for the thin MWNTs, moderate for the thick MWNTs, and small for the solid MWNTs. Numerical results also indicate that, the associated buckling mode is unique and dependent on the structure of MWNTs. Especially, for combined torsional buckling of MWNTs with very small axial stress and radial pressures, the buckling mode is just the one for the corresponding pure torsional buckling.

Stability of multi-walled carbon nanotubes under combined bending and axial compression loading

Bending Stability of Multiwalled Carbon Nanotubes

Buckling of Embedded Multi-Walled Carbon Nanotubes under Combined Torsion and Axial Loading

Bending Stability of Multi-Wall Carbon Nanotubes Embedded in an Elastic Medium

Combined Torsional Buckling of Multi-Walled Carbon Nanotubes Coupling with Axial Loading and Radial Pressures

Influence of temperature change on column buckling of multiwalled carbon nanotubes

Transverse vibrations of double-walled carbon nanotubes under compressive axial load

Eccentric Compression Stability of Multi-Walled Carbon Nanotubes Embedded in an Elastic Matrix

Effect of small length scale on elastic buckling of multi-walled carbon nanotubes under radial pressure

Thermal Buckling of Multi-Walled Carbon Nanotubes Based on a Rigorous Van Der Waals Interaction

Torsional Buckling of Multi-Walled Carbon Nanotubes Subjected to Torsional Loads

Combined Bending Stability of Carbon Nanotubes Subjected to Thermo-Electro-Mechanical Loadings

Combined Torsional Buckling of Double-Walled Carbon Nanotubes with Axial Load in the Multi-Field Coupled Condition

Axisymmetric compressive buckling of multi-walled carbon nanotubes under different boundary conditions

Dynamic Buckling Behavior of Multi-Walled Carbon Nanotubes Subjected to Step Axial Loading

Torsional Buckling of Multi-Walled Carbon Nanotubes under Combined Axial and Radial Loadings

Combined Torsional Buckling of Multi-Walled Carbon Nanotubes Coupling with Radial Pressures

Bending Buckling Behaviors of Single- and Multi-Walled Carbon Nanotubes

Torsional Buckling of Multi-Wall Carbon Nanotubes Embedded in an Elastic Medium

Investigation of Axially Compressed Buckling of a Multi-Walled Carbon Nanotube under Temperature Field

Axially Compressive Deformation Mechanisms of Single- and Multi-Walled Carbon Nanotubes Via Finite Element Analysis