Abstract:Whispering gallery mode (WGM) optical resonators utilizing resonance shift (RS) and mode splitting (MS) techniques have emerged as highly sensitive platforms for label-free detection of nano-scale objects. RS method has been demonstrated in various resonators in air and liquid. MS in microsphere resonators has not been achieved in aqueous environment up to date, despite its demonstration in microtoroid resonators. Here, we demonstrate scatterer-induced MS of WGMs in microsphere resonators in water. We determine the size range of particles that induces MS in a microsphere in water as a function of resonator mode volume and quality factor. The results are confirmed by the experimental observations.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to achieve mode splitting (MS) in micro - sphere resonators in the water environment. Specifically, the paper explores the possibility of detecting nanoparticles through mode splitting caused by scatterers in the water environment, and studies the parameters that affect the observation of mode splitting, such as micro - sphere size, quality factor (Q), mode volume (V), and field distribution intensity at the particle position ($f^2(r)$).
### Background and Problem Description of the Paper
- **Background**: Whispering Gallery Mode (WGM) optical resonators, using resonance shift (RS) and mode splitting (MS) techniques, have become platforms for highly sensitive label - free detection of nano - scale objects. The RS method has been verified in various resonators in air and liquid, while the MS method has been mainly achieved in micro - ring and micro - sphere resonators in air, but not yet in micro - sphere resonators in the water environment.
- **Problem**: How to achieve mode splitting in micro - sphere resonators in the water environment and determine the particle size range that can cause mode splitting.
### Research Methods
- **Experimental Design**: Experiments were carried out using micro - sphere resonators of different sizes and polystyrene (PS) nanoparticles of different radii. In the experiment, the micro - sphere resonator was prepared at the tip of a tapered fiber by melting, and light was coupled into and out of the micro - sphere from a tunable laser in the 660 - nm band. After preliminary characterization in air, the micro - sphere - fiber system was immersed in about 50 μL of deionized water droplets, and then 2 μL of PS nanoparticle solution with a concentration of about 2×10\(^{-11}\) wt% was added. The transmission spectra were continuously collected for 10 - 15 minutes. If no mode splitting was observed, the particle concentration was increased to increase the probability of mode splitting.
- **Theoretical Analysis**: Through numerical simulation and experimental data, the effects of micro - sphere size, quality factor, mode volume, and field distribution intensity on mode splitting were studied. The resolvable condition for mode splitting is \( |2g| > \Gamma+\omega/Q \), where \( |2g|=\alpha f^2(r)\omega/V \) and \( \Gamma = |g|\alpha\omega^3/3\pi\nu^3 \) represent the mode splitting amount caused by scatterers and the additional loss respectively, \( \omega \) is the angular resonance frequency of WGM, Q is the quality factor, \( \nu \) is the speed of light in the surrounding medium, \( \omega/Q \) represents the line width of the resonance mode before scattering, and \( \alpha \) is the polarizability, defined as \( \alpha = 4\pi R^3(n_p^2 - n_e^2)/(n_p^2 + 2n_e^2) \), where \( R \) is the particle radius, \( n_p \) is the refractive index of the particle, and \( n_e \) is the refractive index of the surrounding environment.
### Main Findings
- **Observation of Mode Splitting**: The mode splitting phenomenon caused by nanoparticles was successfully observed in the water environment.
- **Parameter Influence**: The smaller the micro - sphere size, the larger the mode volume and the lower the quality factor, which makes it more difficult to observe mode splitting in the water environment. To detect smaller particles, a higher Q/V ratio and a higher field distribution intensity \( f^2(r) \) are required.
- **Optimization Suggestions**: To achieve mode splitting in the water environment, it is necessary to carefully design the micro - sphere resonator to have a smaller mode volume and a higher quality factor, and at the same time, a higher field distribution intensity at the particle position.
### Conclusion
The paper has successfully achieved mode splitting in micro - sphere resonators in the water environment, and systematically analyzed the relationship between resonator size and quality factor and the detectable particle size range. In addition, the paper also explains why the mode splitting caused by nanoparticles was not observed in the early water environment, and provides methods for optimizing micro - sphere size and quality factor for specific particle size ranges.