Abstract:The use of carbon fiber reinforced plastic (CFRP) is rapidly increasing in aerospace and automobile applications. This is in large part due to the increase strength and modulus of carbon fiber composites compared to other materials such as glass fiber composites. The fiber-matrix interface has been found to be important for high strength in composites. Methods that have been studied and developed to improve interfacial property of composites include: the addition of coupling agents, surface modifications, chemical reaction control and use of nano-fillers for reinforcement. During mechanical loading the shape of carbon fibers, in a composite, is altered with a concomitant change in electrical resistance. Carbon fibers are used as sensing elements in CFRP due to their electrical conductivity. In some more advanced studies, in CRFP, the carbon fibers were used for both strain sensing and damage sensing. The basic theory, in such studies, was that the movement of carbon fiber could be detected by electrical resistance measurement. During loading, the extent of contact between carbon fibers in a CF tow is altered, and the electrical resistance changes from its initial value. In this work, interfacial properties of carbon fiber/polymer composites were evaluated by such electrical resistance measurements. During the wetting process of CF tows by the polymer resins, the change in electrical resistance was recorded and analyzed. The test results for different carbon fibers and polymer resins exhibited different trends. The electrical resistance change was associated with the different wetting conditions, and the interfacial properties were predicted by these electrical resistance measurements. CF tow/epoxy exhibited the poorest carbon tow wettability, the smallest change in resistance and the poorest IFSS and ILSS. For the four systems studied, the relative change in each of these quantities for the materials of a given composite was roughly proportional to the other measured quantities. This may have some very significant practical importance. It may point the way to use quick easy tests to screen and predict other behaviors for composites of different materials and/or processes. Perhaps a simple resistance change test might be used to predict and select good candidate materials, surface processing techniques for high strength composite applications. The proportional relationship between interfacial adhesion and electrical resistance change was obtained by trend fitting line analyses. Ultimately, it was demonstrated that mechanical properties related to interfacial properties might potentially be predicted by electrical resistance measurement and studies of wetting behavior, using empirical formulas and correlations.

Preparation and characterization of carbon fiber-reinforced thermosetting composites: a review

New Method for Interfacial Evaluation of Carbon Fiber/Thermosetting Composites by Wetting and Electrical Resistance Measurements

Interfacial Evaluation Of Carbon Frinforced Nano-Composites Using Electrical Resistance Measurement With Wetting Tests

Preparation of short carbon fiber reinforced photosensitive resin and composite material properties study

Progress in surface modification preparation, interface characterization and properties of continuous carbon fiber reinforced polymer matrix composites

Research Progress on Preparation and Properties of Carbon Fiber Reinforced Thermoplastic Composites

Review of the surface treatment process for the adhesive matrix of composite materials

Carbon fiber surfaces and composite interphases

Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites

The surface modification of carbon fiber for thermoplastic HDPE composites

Comprehensive Review of the Properties and Modifications of Carbon Fiber-Reinforced Thermoplastic Composites

Unravelling the Influence of Surface Modification on the Ultimate Performance of Carbon Fiber/Epoxy Composites

Research progress on the surface modification of carbon fiber

Recent advances of interfacial modifications toward carbon fiber‐reinforced thermoplastic polypropylene and polyamide composites

Recent advances in interface microscopic characterization of carbon fiber-reinforced polymer composites

Effect of surface functionalization on the surface and inter-facial properties of thermoplastic-coated carbon fibers

Preparation, Properties and Mechanisms of Carbon Fiber/Polymer Composites for Thermal Management Applications

Improving mechanical and tribological properties of carbon fabric/resin laminated composites by carbon fiber powder

Preparation of fixed length carbon fiber reinforced plastic composite sheets with isotropic mechanical properties

Chemical, biological, and nanoclay treatments for natural plant fiber-reinforced polymer composites: A review

Preparation and Properties of Carbon Fiber/Carbon Nanotube Wet-Laid Composites