Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Renewable and green fuels like carbon-free ammonia and carbon neutral algal-biodiesel appear to be more promising alternatives. Reactivity controlled compression ignition offers a viable alternative to classical combustion. In current delving, compression ratio, injection timing and premixing ratio are established by investigating the combustion, performance, and emission parameters of reactivity-controlled compression ignition operation fueled with ammonia and algae biodiesel as low reactive and high reactive fuel. Primarily, different compression ratio (16, 17, and 18) for different ammonia energy premixing fractions (20%, 30%, 40%, and 50%) at 80% load with standard injection time (24° before top dead center) was evaluated to identify the ideal compression ratio. Next stage, different Injection timing (24°, 26°, and 28° before top dead center) was examined with that ideal compression ratio at 80% load utilizing combustion attributes. Finally, with the ideal compression ratio and injection timing (18° and 26°), the performance and emission for various ammonia energy premixing fractions (20%, 30%, 40%, and 50%) on the entire load ranges (20%, 40%, 60%, 80%, and 100%) were investigated and the optimal fuel fraction was arrived by multi objective optimization technique in response surface methodology by considering response weights. The multi objective optimization result enhances the 43% ammonia premixing combustion. The experimental validation of 43% ammonia premixing combustion achieved the best brake thermal efficiency of 34.02% whereas fuel consumption is 12.72 MJ/kWh. The maximum emission rate of hydrocarbon, carbon monoxide, carbon dioxide, oxides of nitrogen and smoke opacity is 47 ppm, 0.084% volume, 2.04% volume 593 ppm and 15.9%. In comparison to the Conventional biodiesel combustion, an increase in efficiency of 3.34% and a decrease in energy consumption of 3.72% are achieved for the 43% ammonia energy premixing combustion. Similarly, emissions were reduced by 45.35%, 44%, 46.25%, 23.44%, and 28.38% respectively than conventional biodiesel combustion.

Experimental Studies to Reduce Usage of Fossil Fuels and Improve Green Fuels by Adopting Hydrogen-Ammonia-Biodiesel as Trinary Fuel for RCCI Engine

Multicriteria Decision-Making Technique for Choosing the Optimal Ammonia Energy Share in an Ammonia-Biodiesel-Fueled Reactivity-Controlled Compression Ignition Engine

Enhancing reactivity-controlled compression ignition engine performance: A response surface methodology approach with ammonium hydroxide-waste cooking oil biodiesel optimization

Hydrogen/diesel RCCI engine performance assessment at low load

Maximum reduction in greenhouse gas emissions by complete replacement of natural gas with pure hydrogen as a sole low reactive fuel in a RCCI engine

Investigations on reactivity controlled compression ignition combustion with different injection strategies using alternative fuels produced from waste resources

Numerical Investigation of Engine Performance and Emission Characteristics of an Ammonia/Hydrogen/n-Heptane Engine Under RCCI Operating Conditions

An Experimental and ANN Analysis of Ammonia Energy Integration in Biofuel Powered Low-Temperature Combustion Engine to Enhance Cleaner Combustion

Experimental and numerical analysis of engine characteristics of an ammonia-substituted dual-fuel CRDI diesel engine

An Efficient Data-Driven Approach for Modeling and Optimization of Reactivity-Controlled Compression Ignition Engine Fueled with Polyoxymethylene Dimethyl Ethers and Hydrogen

Assessment of reactive-control compression ignition engine performance and emissions using spirulina microalgae biodiesel in conjunction with methanol as low-reactive fuel

Impact of hydrogen flow rate on H2+diesel combustion in RCCI engine

Method to Reach High Substitution of an Ammonia Fueled Engine Using Dual Fuel RCCI and Active Combustion Control

Optimization of ideal engine parameters to adopt ammonia and algae biodiesel for reactivity controlled compression ignition engine using response surface methodology

Computational Analysis of Ammonia-Hydrogen Blends in Homogeneous Charge Compression Ignition Mode of Engine Operation

Effect of manifold injection of 1‐hexanol on a reactivity controlled compression ignition engine fuelled with neem oil methyl ester blend

A novel experimental performance and emission study on CRDI engine using hydrogenated and green biodiesels: A turbo powered engine with hydrogen dual fuel and ANN prediction approach

Influence of injection strategies on ignition patterns of RCCI combustion engine fuelled with hydrogen enriched natural gas

The Experimental Investigation of the Effects on the Combustion, Performance, and Emission Characteristics of an RCCI Engine Using Methanol/Diesel Fuel

Experimental study of butanol blending in biogas-biodiesel fueled CI engine under dual fuel, RCCI and HCCI combustion modes

Effect of Fuel Injection Pressure and Premixed Ratio on Mineral Diesel-Methanol Fueled Reactivity Controlled Compression Ignition Mode Combustion Engine