Abstract:An integrated in-situ neutron diffraction and elastic plastic self-consistent crystal plasticity (EPSC-CP) modeling scheme is performed on a binary Al-12Ce alloy and a ternary Al-12Ce-0.4Mg alloys. Using this scheme, the constitutive parameters, i.e. elastic constants and slip system parameters of individual phases can be calibrated which can be used in microstructure-based crystal plasticity models to predict materials performance. From this study, it is shown that the elastic constants of Al11Ce3 intermetallics calculated from DFT calculation in the literature are rather accurate. When applied to the EPSC-CP model, the lattice strains of both the binary and ternary alloys are correctly predicted as compared with experiments, and large lattice strain differences between Al (100) plane and Al11Ce3 (010) plane are demonstrated. The slip system parameters calibrated by the scheme shows that the addition of 0.4 wt% Mg in the alloy has little influence on the critical resolved shear stress (CRSS) of initial dislocation glide in the Al matrix which caused plastic yield in the material. This can be explained by the very dilute Mg solute content in the Al solid solution, causing large spacing of Al-Mg lattice misfit sites and little impact on resistance of dislocation glide at initial yield. The 0.4 wt% Mg addition, on the other hand, has a large influence on the hardening term in the slip system parameters, indicating those Al-Mg misfit sites do help dislocation accumulation during the deformation. The impact of dilute Mg addition on the Al slip system parameters is also reflected in the flow behavior of the ternary alloy: little impact on the yield stress, but a large impact on working hardening and tensile strength of the materials which is consistent with the literature.

Insight into structure, elastic anisotropy, and phonon dispersion relations of Mg17Ce2 and Mg41Ce5 alloys

Elastic and Electronic Properties of Ce2O3 from First Principles

Utilizing integrated neutron diffraction and elastoplastic self-consistent crystal plasticity model to quantitatively assess the strengthening mechanism in Al-12.5Ce and Al-12.5Ce-0.4Mg alloys

The Structural, Elastic And Thermodynamic Properties Of Intermetallic Phases In Mg-Sn-Si-Ca(Sr) Alloys: A First-Principles Study

Theoretical Investigation of Typical Fcc Precipitates in Mg-based Alloys

Structural and Mechanical Properties of Mg17Al12and Mg24Y5from First-Principles Calculations

Elastic properties and electronic structures of typical Al-Ce structures from first-principles calculations

First-principles study of elastic and electronic properties of MgZn2 and ScZn2 phases in Mg–Sc–Zn alloy

First-Principles Study of the Mechanical Properties of Mg-Based Alloys with FCC and Hexagonal Structure

Anisotropy of the Elasticity, Thermal Conductivity and Optical Parameters of Cmcm and Pmcn BiMg2VO6 Ceramics

Structural, electronic and thermodynamic properties of BiF3-type Mg3Gd compound: A first-principle study

Structural, elastic and electronic properties of β′ phase precipitate in Mg–Gd alloy system investigated via first-principles calculation

Elastic and Electronic Properties of Mg<sub>2</sub>Ca and Mg<sub>2</sub>Y Phases

First-principles study the mechanical, electronic, and thermodynamic properties of Mg-Al-Mn ternary compounds

Mechanical, Electronic and Thermodynamic Properties of C14-type AMg2 (A = Ca, Sr and Ba) Compounds from First Principles Calculations

Investigation on the crystal structure and mechanical properties of the ternary compound Mg11-xZnxSr combined with experimental measurements and first-principles calculations

First-principles investigation of the structural and mechanical properties of β″ phase in Mg–Gd alloy system

First-principles study on the elastic anisotropy and thermal properties of Mg–Y compounds

Structural, elastic and electronic properties of Mg(Cu1-xZn x)2 alloys calculated by first-principles

Structural, electronic, elastic and thermal properties of Mg2Si

First-principles Studies of Lattice Dynamics and Thermal Properties of Mg2Si1−xSnx