Abstract:Optimization of hollow cylindrical polymer fiber reinforced composite tubes manufactured with filament winding method subjected to post‐buckling damage. In this study, the post‐buckling damage behavior of cylindrical composite tubes was examined experimentally. The samples were reinforced with glass, carbon, and kevlar fibers to obtain glass‐reinforced fiber polymer (GRFP), carbon‐reinforced fiber polymer (CRFP), and Kevlar‐reinforced fiber polymer (KRFP) cylindrical tubes. The samples were produced using 4 stacking layers with filament winding technology. In producing all composite tubes, the outer diameter was kept constant at 17 mm, and two inner diameters of 12 and 13 mm, two wall thicknesses, 5 winding angles, and two lengths were used as parameters. The load was applied to the samples until completely damaged, and the maximum post‐buckling load values obtained were measured on the testing device. The effect of different reinforcement materials, winding angle, wall thickness, and length on the load‐carrying capacity was analyzed and it was understood that they had a significant effect. It was observed that the load‐carrying capacity of GFRP samples was the highest compared to the others, followed by CFRP and KFRP samples, respectively. In all samples, it was observed that a 0.5 mm wall thickness increase increased the load‐carrying capacity, while a 50 mm length increase decreased it. The energy absorption (EA) values of GFRP, CFRP, and KFRP samples were 46.99, 25.22, and 15.48 Joules, respectively. It was understood that the energy absorption of GFRP samples was 1.86 times better than CFRP and 3 times better than KFRP. Highlights The samples were produced using the fiber winding method, which is one of the most common production methods in the manufacture of tubes. Three different polymer reinforcement materials were used in the production of the samples. The effects of polymer reinforcement material, winding angle, length, and wall thickness on the maximum post‐buckling load were investigated. Wall thickness was found to have a significant effect on the maximum post‐buckling load. It was observed that GFRP samples had the highest energy absorption feature.

Effect of triggering on the axial crushing behavior of GFRP tubes: Experimental investigation and optimization

Energy absorption capability of carbon fiber reinforced plastic tubes with semi-circle grooved external trigger

Test on residual ultimate strength of pultruded concrete-filled GFRP tubular short columns after lateral impact

Effect of Triggering Mechanism and Variable Strain Rates on Energy Absorption of Glass Fiber Reinforced Polymer Tubes Under Quasi Static Compression

Multi-response optimization of crashworthy performance of perforated thin walled tubes

Crushing responses of carbon/glass hybrid composite tubes under dynamic compressive loads

On axial crushing behavior of double hat-shaped CFRP and GFRP structures

Picking Up the Optimum Triggering Combinations of Crashworthy 3D-Printed Sustainable Structures: An Experimental Study in Al-Kharj Governorate, KSA

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Axial crush behavior and energy absorption capability of foam-filled GFRP tubes manufactured through vacuum assisted resin infusion process

Axial Impact Response of Carbon Fiber-Reinforced Polymer Structures in High-Speed Trains Based on Filament Winding Process

Crushing responses and energy absorption behaviors of multi-cell CFRP tubes

Transverse impact response of GFRP tubes filled with MWCNT-reinforced syntactic foam

Optimizing the crashworthy behaviors of hybrid composite structures through Taguchi approach

Improvements in the lateral crushing behavior of syntactic foam‐filled glass fiber reinforced polymer tubes by the addition of straight and helical multiwalled carbon nanotubes

Axial Crush Behavior and Energy Absorption Capability of Foam-Filled GFRP Tubes under Elevated and High Temperatures

Crashworthiness and Failure Analyses of FRP Composite Tubes under Low Velocity Transverse Impact

Numerical simulation and multi-objective optimization of thin-walled aluminum/carbon fiber reinforced plastic hybrid tubes under axial crushing

Axial crushing response of carbon/glass hybrid composite tubes: An experimental and multi-scale computational study

The post‐buckling analysis of cylindrical polymer fiber‐reinforced composite tubes subjected to axial loading fabricated by filament winding technology

On Crashworthiness and Energy-Absorbing Mechanisms of Thick CFRP Structures for Railway Vehicles