Porous carbon composites as clean energy materials with extraordinary methane storage capacity

Ibtisam Alali,Amina Umar Shehu,Robert Mokaya

DOI: https://doi.org/10.1039/d4ee00749b

IF: 32.5

2024-06-21

Energy & Environmental Science

Abstract:The main hurdle that is holding back the use of natural gas as a fuel for vehicles and in other forms of transportation is the lack of materials that can store sufficient amounts under accessible operating conditions to make it both viable and competitive. In this regard, the main challenge is finding materials that have the right balance of porosity and packing density, and which can store and deliver methane to the set volumetric targets. Here we report a new approach to achieving such materials by presenting the concept of carbon composites that simultaneously have high porosity (up to ca. 2800 m2 g-1 and 1.5 cm3 g-1) and high packing density (up to ca. 1.0 g cm-3). The plastic waste-derived carbon composites, which are modelled on activated carbons but with an added inorganic component, achieve (at 25 oC) methane storage of 285 cm3 (STP) cm-3 at 35 bar, 374 cm3 (STP) cm-3 at 65 bar and 447 cm3 (STP) cm-3 at 100 bar. The carbon composites can also deliver methane of up to 256 cm3 (STP) cm-3 for a pressure swing of 35 to 1 bar, 280 cm3 (STP) cm-3 for a 65 to 5 bar swing, and 358 cm3 (STP) cm-3 for a 100 to 5 bar swing. These values are greater, by some margin, than any previously reported and meet set volumetric uptake targets even at a low pressure of 35 to 65 bar. Our findings offer a new concept and insights in the much wider area of the development of materials for energy-related gas (CH4, H2, CO2, etc) storage, and could offer a step change in the achievable level of volumetric storage of methane as a fuel especially for vehicular use.

chemistry, multidisciplinary,engineering, chemical,energy & fuels,environmental sciences