Abstract:Metamaterials are artificially created materials which unusual properties are due to their geometric structure, not the chemical composition of the base material. The control of physical and mechanical properties through the structure is fundamental for metamate-rials. The tools of the numerical analysis used in this work overweigh experimental tests due to the automation of research, reduced material and financial costs. Here, a tetrachi-ral metamaterial is investigated under uniaxial compression conditions. The base materi-al is described as an elastic medium. An analysis of the influence of the metamaterial's structural organization on its mechanical response is carried out. To do this, two meth-ods of connecting unit cells are considered: "joining" and "overlapping". The following are selected for the analysis: (1) the tension – torsion coupling effect; (2) effective elastic properties (Poisson's ratio and Young's modulus); (3) porosity; and (4) the state of stress and strain. The porosity of the samples obtained by the "joining" method was 80 % and the "overlapping" method resulted in 84 %, the volume of the base material in the second case was 1.6 times larger. It was found that the tension – torsion coupling effect is affect-ed not only by the volume of the base material but also by the internal organization of the structure, namely, the versatile chirality of the touching faces of the unit cells. Analysis of the numerical experiment results showed that the three – dimensional samples have a zero value for the effective Poisson's ratio. The Young's modulus of the sample in which the cells were connected by the "joining" method turns out to be almost 2.7 times higher. Both samples can be described as an anisotropic medium with a lattice in the cubic sys-tem medium, which is shown by studying the properties of metamaterial samples when loaded along three orthogonal axes. The construction created by the "joining" method is characterized by a more heterogeneous pattern of stress distribution and presence of stronger stress concentrators.

THE INFLUENCE OF THE STRUCTURAL ORGANIZATION OF CHIRAL METAMATERIALS ON THEIR PHYSICAL AND MECHANICAL CHARACTERISTICS

In Plane Mechanical Properties of Hexagonal V-chiral and Tri-chiral Metamaterials

Analysis of small-scale topology and macroscale mechanical properties of shape memory chiral-lattice metamaterials

Innovative 3D chiral metamaterials under large deformation: Theoretical and experimental analysis

Mechanical Properties of Hierarchical Anti-Tetrachiral Metastructures

Origami-Inspired Chiral Metamaterials with Tunable Circular Dichroism Through Mechanically Guided Three-Dimensional Assembly

Overall constitutive properties of stratified lattices with alternating chirality

Design and analysis of three-dimensional chiral metamaterials for enhanced torsional compliance

Deformation mechanism of innovative 3D chiral metamaterials

Low-frequency property and vibration reduction design of chiral star-shaped compositive mechanical metamaterials

Study on the double negativity in deformed single-phase chiral metamaterials under tensile loads

Tailoring the characteristic length scale of 3D chiral mechanical metamaterials

Observation of Chirality‐Induced Roton‐Like Dispersion in a 3D Micropolar Elastic Metamaterial

Mechanical modeling of innovative metamaterials alternating pentamode lattices and confinement plates

Non-affinity in multi-material mechanical metamaterials

Dynamic characterisation of novel three-dimensional axisymmetric chiral auxetic structure

3D chiral mechanical metamaterial for tailored band gap and manipulation of vibration isolation

Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review

Design and characterization of novel bi-directional auxetic cubic and cylindrical metamaterials

3D auxetic mechanical metamaterials: an analytical, numerical, and experimental study

Metamaterials with conformational nonlinearity