Abstract:In single-inductor multiple-output converters, the multiplexing of the inductor at each output port will inevitably lead to severe cross-regulation effect. This paper aims to investigate the steady state performance and transient state cross-regulation in the single-inductor multiple-output DC-DC converters. A ripple-based averaged model is proposed to describe the inherent cross-regulation characteristics of single-inductor dual-output (SIDO) Buck-Boost DC-DC converter by considering the three piecewise ripple of the inductor current. Then, the steady state performance analysis is carried out to show the cross-coupling effect on the power distribution relationship and voltage gains of the two output ports. Furthermore, the nonlinear modal series representation is derived to describe the transient behavior of SIDO converter under different load disturbances. More significantly, based on the nonlinear modal analysis, the cross-regulation factors are proposed to evaluate the influence of some key circuit parameters on the transient state cross-regulation. It is found that increasing kp2 may improve the transient cross-regulation performance of the output voltages, but non-ideal factor VF has little influence on the transient cross-regulation. This provides much design-oriented information to suppress the cross-regulation and optimize the transient performance of the SIDO converter. Finally, the effectiveness of the above analysis is verified by the experimental results. This paper proposes one design-oriented analysis method to investigate the cross-regulation in the SIDO DC-DC converters based on the ripple-based averaged model. Firstly, the steady state analysis is carried out to show the cross-coupling effect on the power distribution of the two output ports. Then, according to the nonlinear modal analysis, the cross-regulation factors are defined to identify the key parameters for the transient cross-regulation, which provides some design-oriented information to suppress the cross-regulation.

DC Regulation and Loop Gain Analysis of a DC-DC Switch Mode Power Supply: A Case Study on a Synchronous PWM Controlled Buck Converter

A Current-Mode DC-DC Buck Converter with High Stability Independent of Load and Supply Voltage

A Current-Mode DC-DC Buck Converter with High Stability and Fast Dynamic Response

PWM/PSM Dual-Mode Controller for High Efficiency DC-DC Buck Converter

Design and Simulation of a PFM-PWM Hybrid Controller for DCDC Converter with CLLC Topology

Modeling and Control for DC-DC Converters Based on Hybrid System

Performance Optimization of the Regulation Loop of a Buck Chopper Driven by Duty Cycle Modulation

A bi-directional resonant DC/DC converter with frequency tracking control

The Empirical Analysis, Mathematical Modeling, and Advanced Control Strategies for Buck Converter

Stabilization Of Dc-Dc Buck Power Converter Feeding A Mixed Load Using Passivity-Based Control With Nonlinear Disturbance Observer

Accurate Loop Gain Model of Ripple-Based Constant On-Time Controlled Buck Converters

Modeling Analysis of Superbuck Converter in Dual-Loop Competition Control

State Feedback with Integral Control Circuit Design of DC-DC Buck-Boost Converter

Multi-loop controller design for diode-assisted buck-boost voltage source inverter

Design‐oriented analysis of cross‐regulation in single‐inductor dual‐output Buck‐boost DC‐DC converters

Modeling and Decoupled Control of A Non-Isolated High Step-Up/Down Bidirectional Dc-Dc Converter

Discrete-Time Poles and Dynamics of Discontinuous Mode Boost and Buck Converters Under Various Control Schemes

Advanced Control Strategies for DC-DC Buck Converters with Parametric Uncertainties Via Experimental Evaluation

Design of Self-Regulation Slope Compensation Circuit for Buck DC-DC Converter

Small-Signal Modeling and Closed-Loop Control of Bidirectional Buck-Boost Current-Fed Isolated DC–DC Converter

Modified Fast Terminal Sliding Mode Control for DC-DC Buck Power Converter with Switching Frequency Regulation