Abstract:The objective of this paper is to present examples of efficient procedures for field measurement of live load, live load effect in bridge components, and proof load testing to verify the ultimate strength. The major truck parameters include gross vehicle weight (GVW), axle weights, and axle configuration (spacing). These parameters can be measured using weigh-in-motion technique, invisible to the drivers (to avoid bias). Stress spectra are important for prediction of the remaining life for bridge girders and details. These measurements should be performed over longer periods of time and they can be carried out using strain transducers. Monitoring of live load is an important element of evaluation of existing bridges. It has been confirmed that truck loads are strongly site-specific. Furthermore, load effects such as bending moment, shear and/or stress are component-specific. The objective of this presentation is to review some of the practical procedures used for field measurement of truck weights and strains. The truck load spectra for bridges are strongly site-specific. Bridges located on major routes between large industrial metropolitan areas will experience the highest extreme loads. Routes where vehicles are able to circumvent stationary weigh stations will have very high extreme loads. Bridges not on a major route, that are very near a weigh station, or that are within a metropolitan area experience much lower extreme loads. Live load stress spectra are strongly component-specific. Each component experiences a very different distribution of strain cycle ranges. The girder that is nearest the left wheel track of vehicles traveling in the right lane experiences the highest stresses in the stress spectra and decreases as a function of the distance from this location. This information can be useful to target bridge inspection efforts to the critical members. Proof load testing can be used as an efficient tool to verify the minimum ultimate strength of an existing bridge. A procedure has been developed at the University of Michigan which is based on using military tanks as proof load. Tanks provide an exceptionally heavy load (about 60 tons) over a short length (4.5 m). The test procedure will be demonstrated on several selected bridges recently tested in Michigan. The results indicate that many structures which are deficient by analytical methods of evaluation, can be justified by proof load tests. For the covering abstract see ITRD E111699.

Safety Study of Steel Structure of Weighbridge I Girder Against Hauling Trailer

Site-Specific Fatigue Load Spectrum for Urban Bridges

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements

ESS-based Probabilistic Fatigue Life Assessment of Steel Bridges: Methodology, Numerical Simulation and Application

Monitoring-Based Fatigue Reliability Assessment of Steel Bridges: Analytical Model and Application

Fatigue Reliability Analysis of a Suspension Bridge Using Long-Term Monitoring Data

Hot Spot Stress Approach For Fatigue Life Assessment In Welded Bridge Connections Using Monitoring Data And Fem Analysis

Dynamic characteristic analysis and fatigue life estimation of steel-structure bridges under vehicle loading

Fatigue Life Estimation of Existing Bridge Using 3-D FEM and Live Load Simulation

Vehicle models for fatigue loading on steel box-girder bridges based on weigh-in-motion data

Investigation of the Stiffness of a Specially Strengthened Bridge When Crossed by Very Heavy Vehicles – A Case Study

Research on heavy-haul adaptive technology and strengthening measures for existing railway steel bridge

DIAGNOSTIC AND PROOF LOAD TESTING FOR BRIDGE EVALUATION

Construction and Live Load Behavior of a Skewed Steel I-Girder Bridge

Dynamic Behaviour of Bridge Girders with Trapezoidal Profiled Webs Subjected to Moving Loads

FINITE ELEMENT SIMULATION ANALYSIS OF STEEL TRUSS ARCH BRIDGE JACKING CONSTRUCTION

Load Test Analysis of a Long-Span Prestressed Nano-Concrete Highway Bridge

Fatigue Performance of a Novel Steel–Concrete Joint of a Long-Span High-Speed Railway Hybrid Girder–Cable-Stayed Bridge

Fatigue Analysis of Long-Span Steel Truss Arched Bridge Part I: Experimental and Numerical Study of Orthotropic Steel Deck

Fatigue Evaluation of Steel Bridge Details Integrating Multi-Scale Dynamic Analysis of Coupled Train-Track-Bridge System and Fracture Mechanics