Abstract:The development of 3D printing technologies using composite materials has revolutionized additive manufacturing. Using these technologies, various products can be fabricated with strengths beyond the limits of the strength of the polymer used. However, although parts manufactured using carbon fiber reinforced plastic (CFRP) 3D printing have excellent characteristics, research on their durability is lacking, making their application difficult in the real industry. In this study, an ultrasonic fatigue test was conducted on a CFRP material manufactured by 3D printing to evaluate fatigue performance. Because of the characteristics of CFRP, the strength varies depending on the orientation angle of the carbon fiber, and the durability also varies. Therefore, an experiment on three types of specimens mixed in the bi-direction and uni-direction of 0° and 90° was conducted. For the ultrasonic fatigue test, a specimen design with a special shape is required according to the resonance frequency and dynamic modulus of the material. To this end, a specimen was designed based on measurements of the physical properties of the material according to the angle of the fiber, which were verified by Finite element method (FEM) modal analysis, and the fatigue life was estimated through an actual experiment. The fatigue failure life was simulated by FEM fatigue analysis considering the measured fatigue test results and the derived anisotropic properties simultaneously. Additionally, based on the advantages of CFRP 3D printing, which adjusts the fiber pattern, we fabricated a specimen with a concentric pattern to derive the fatigue life and calculate the actual life improvement. Based on the results of this study, the specific rigidity of the CFRP parts can be optimized by adjusting the fiber pattern. Additionally, the results of this study can aid in the analysis of the fatigue characteristics of 3D-printed CFRP materials.

METHOD OF TESTING PLASTIC PRODUCTS MANUFACTURED USING 3D PRINTING FOR STRENGTH IN BENDING

Determination of Residual Stresses in 3D-Printed Polymer Parts

An Investigation of Tensile, Fatigue, and Fracture Behavior of 3D-Printed Polymers

Application of the Dynamic Indentation Method for Evaluation of the Hardness and Elastic Modulus of the Material of Products Obtained by Extrusion Method of Additive Production from Carbon-Filled Composite Materials

Mechanical Properties and Performance of 3D-Printed Acrylonitrile Butadiene Styrene Reinforced with Carbon, Glass and Basalt Short Fibers

ANALYSIS OF PRINTING PARAMETERS IN 3D PRINTED CARBON FIBER COMPOSITES USING DESIGN OF EXPERIMENTS

Mechanical characterization and experimental modal analysis of 3D Printed ABS, PC and PC-ABS materials

Technology and mechanical properties of reinforced continuous fiber 3D-printed thermoplastic composite

Additive manufacturing of mechanical testing samples based on virgin poly (lactic acid) (PLA) and PLA/wood fibre composites

Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation

Comparison of the Charpy Resilience of Two 3D Printed Materials: A Study on the Impact Resistance of Plastic Parts

Evaluation of fatigue characteristics of 3D printed/composites reinforced with carbon fiber using design of experiments

Comparative investigation on the mechanical behavior of injection molded and 3D-printed thermoplastic polyurethane

Static Behavior of a 3D-Printed Short Carbon Fiber Polyamide: Influence of the Meso-Structure and Water Content

Compression Performance with Different Build Orientation of Fused Filament Fabrication Polylactic Acid, Acrylonitrile Butadiene Styrene, and Polyether Ether Ketone

Additive manufacturing of parts with three-dimensional continuous fiber reinforcement

Characterization of 3D-printed PLA parts with different raster orientations and printing speeds

Synthesis and Investigation of Mechanical Properties of the Acrylonitrile Butadiene Styrene Fiber Composites Using Fused Deposition Modeling

Flexure Behaviors of ABS-based Composites Containing Carbon and Kevlar Fibers by Material Extrusion 3D Printing

Ultrasonic fatigue analysis of 3D-printed carbon fiber reinforced plastic

Influence of the Manufacturing Method (3D Printing and Injection Molding) on Water Absorption and Mechanical and Thermal Properties of Polymer Composites Based on Poly(lactic acid)