Abstract:Poly(L‐lactide) (PLLA), poly(D‐lactide) (PDLA) and poly(methyl methacrylate) (PMMA) are melt blending with various content of PDLA (0 and 3 wt%) and PMMA (0–20 wt%). The blending pellets then undergoes the melt spinning and hot drawing process to prepare PLA composite fibers. The hydrolysis resistance of fibers is improved by the addition of PMMA and the mechanical property and heat resistance properties increased for the highly oriented crystalline morphology induced by the stereocomplex crystals (SC), which have formed in PLLA/PDLA/PMMA fibers. The SC nanofibrils are detected from the surface morphology of PLLA/PDLA/PMMA fibers after hydrolysis at 60°C for 132 h in NaOH solution. Polylactic acid/poly(methyl methacrylate) (PLA/PMMA) composite fibers with high performance were fabricated using melt spinning technique. The crystallization, lamellae orientation and physical properties of composite fibers were investigated systematically. The addition of PMMA (0–20 wt%) has improved the hydrolysis resistance of composite fibers by preventing water molecules from penetrating and diffusing through the fibers, but the strength and heat resistance were reduced at the same time. The stereocomplex crystallites (SC) formed before spinning by introducing poly(D‐lactide) (PDLA) (3 wt%) in poly(L‐lactide) (PLLA) matrix and acted as nucleating agents to enhanced the crystallization and lamellae orientation of PLLA matrix, which improved the physical properties of PLA composite fibers resultful. The tensile strength of PLA fibers with 3 wt% PDLA and 5 wt% PMMA was increased 31% as well as the boiling water shrinkage and the hydrolysis rate were decreased 30% and 33% in relation to PLLA fibers. Finally, the hydrolysis resistance was further enhanced on the basis of realizing high strength and heat resistance, which is of great significance for preparing durable PLA fiber materials and expanding their application.

The Development of Sustainable Polyoxymethylene (POM)-Based Composites by the Introduction of Natural Fillers and Melt Blending with Poly(lactic acid)-PLA

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Improving the Toughness and Thermal Resistance of Polyoxymethylene/Poly(lactic acid) Blends: Evaluation of Structure-Properties Correlation for Reactive Processing

Poly(lactic Acid)/polyoxymethylene Blends: Morphology, Crystallization, Rheology, and Thermal Mechanical Properties

Thermo-Blending of Biobased Poly(propylene 2,5-furan dicarboxylate) and Poly(lactic acid) with Improved Mechanical Performance

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Development of Toughened Flax Fiber Reinforced Composites. Modification of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blends by Reactive Extrusion Process

Compatibility of Sustainable Mater-Bi/poly(ε-caprolactone)/cellulose Biocomposites as a Function of Filler Modification

The Use of Agricultural Waste in the Modification of Poly(lactic acid)-Based Composites Intended for 3D Printing Applications. The Use of Toughened Blend Systems to Improve Mechanical Properties

Investigation on the mechanical, thermal and electrical properties of polyoxymethylene composites modified by thermoplastic polyurethane elastomer and carbon fiber

Toward durable polylactic acid/poly(methyl methacrylate) polyblend fibers with high performance

Development and characterization of eco-friendly extruded green composites using PLA/wood dust fillers

Valorization of Waste Wood Flour and Rice Husk in Poly(Lactic Acid)-Based Hybrid Biocomposites

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion

The Development of Poly(lactic acid) (PLA)-Based Blends and Modification Strategies: Methods of Improving Key Properties towards Technical Applications—Review

Functional MgO–Lignin Hybrids and Their Application as Fillers for Polypropylene Composites

Chain Extension of Poly(Lactic Acid) (PLA)-Based Blends and Composites Containing Bran with Biobased Compounds for Controlling Their Processability and Recyclability

POM/EVA Blends with Future Utility in Fused Deposition Modeling

Super-tough sustainable biobased composites from polylactide bioplastic and lignin for bio-elastomer application

The Impact of Filler Geometry on Polylactic Acid-Based Sustainable Polymer Composites

Influence of a Biofiller, Polylactide, on the General Characteristics of Epoxy-Based Materials