Abstract:Environmental sanitation in food manufacturing plants promotes food safety and product microbial quality. However, the development of experimental models remains a challenge due to the complex nature of commercial cleaning processes, which include spraying water and sanitizer on equipment and structural surfaces within manufacturing space. Although simple in execution, the physical driving forces are difficult to simulate in a controlled laboratory environment. Here, we present a bench-scale bioreactor system which mimics the flow conditions in environmental sanitation programs. We applied computational fluid dynamic (CFD) simulations to obtain fluid flow parameters that better approximate and predict industrial outcomes. According to the CFD model, the local wall shear stress achieved on the target surface ranged from 0.015 to 5.00 Pa. Sanitation efficacy on six types of environmental surface materials (hydrophobicity, 57.59 to 88.61°; roughness, 2.2 to 11.9 μm) against two different microbial targets, the bacterial pathogen Listeria monocytogenes and Exophiala species spoilage fungi, were evaluated using the bench-scale bioreactor system. The relative reduction ranged from 0.0 to 0.82 for Exophiala spp., which corresponded to a 0.0 to 2.21 log CFU/coupon reduction, and the relative reduction ranged from 0.0 to 0.93 in L. monocytogenes which corresponded to a 0.0 to 6.19 log CFU/coupon reduction. Although most treatment parameters were considered statistically significant against either L. monocytogenes or Exophiala spp., contact time was ranked as the most important predictor for L. monocytogenes reduction. Shear stress contributed the most to Exophiala spp. removal on stainless steel and Buna-N rubber, while contact time was the most important factor on HDPE (high-density polyethylene), cement, and epoxy.IMPORTANCE Commercial food manufacturers commonly employ a single sanitation program that addresses both bacterial pathogen and fungal spoilage microbiota, despite the fact that the two microbial targets respond differently to various environmental sanitation conditions. Comparison of outcome-based clusters of treatment combinations may facilitate the development of compensatory sanitation regimes where longer contact time or greater force are applied so that lower sanitizer concentrations can be used. Determination of microbiological outcomes related to sanitation program efficacy against a panel of treatment conditions allows food processors to balance tradeoffs between quality and safety with cost and waste stream management, as appropriate for their facility.

Ambient Temperature and Relative Humidity Remained Stable after Prolonged Application of Superheated Steam in Enclosed Spaces

Are Antimicrobial Interventions Associated with Heat-Resistant Escherichia Coli on Meat?

Infrared Thermal Image Processing Technique for Evaluating Superheated Steam as a Dry Sanitation Method

Superheated steam processing: An emerging technology to improve food quality and safety

Inactivation of Escherichia coli O157:H7, Salmonella typhimurium, and Listeria monocytogenes on cherry tomatoes and oranges by superheated steam

Influence of Superheated Steam Temperature and Moisture Exchange on the Inactivation of Geobacillus stearothermophilus Spores in Wheat Flour-Coated Surfaces

Simulations of thermal phase changes and bacterial inactivation in a superheated steam dishwasher

Microbial Decontamination of Wheat Grain with Superheated Steam

Comparison of the effect of saturated and superheated steam on the inactivation of Escherichia coli O157:H7, Salmonella Typhimurium and Listeria monocytogenes on cantaloupe and watermelon surfaces

Detection of Superheated Steam during Sterilization Using Biological Indicators

Human Responses to High Air Temperature, Relative Humidity and Carbon Dioxide Concentration in Underground Refuge Chamber

Effect of temperature and velocity of superheated steam on initial condensation of distillers’ spent grain pellets during drying

All Treatment Parameters Affect Environmental Surface Sanitation Efficacy, but Their Relative Importance Depends on the Microbial Target

Steam quality monitoring as a strategy to reduce wet packs and sterilization failure

Superheated steam drying and its applicability for various types of the dryer: The state of art

A Comprehensive Study on the Influence of Superheated Steam Treatment on Lipolytic Enzymes, Physicochemical Characteristics, and Volatile Composition of Lightly Milled Rice

Effect of Hydrothermal Treatment on the Levels of Selected Indigenous Microbes in Food Waste

Inactivation of E. coli O157:H7, Salmonella enterica, and L. monocytogenes through semi-continuous superheated steam treatment with additional effects of enhancing initial germination rate and salinity tolerance

High-Efficiency Superheated Steam Generation for Portable Sterilization under Ambient Pressure and Low Solar Flux

Survival of Salmonella on Red Meat in Response to Dry Heat

Hydrothermal treatment for inactivating some hygienic microbial indicators from food waste-amended animal feed.