Abstract:The drying behavior of barley at both the particle scale and grain pile scale was investigated, revealing the influence of air temperature and relative humidity on the drying. Valuable insights were provided to optimize the drying parameters, aiming to enhance the efficiency and quality of the barley grain drying process. Drying conditions greatly affect the quality of grains, and efforts should be made to minimize the loss of grains during the drying process. In this study, numerical simulations were conducted to investigate the drying behavior of barley at both the particle and grain pile scales by solving the coupled heat and moisture equation. The model was validated using thin‐layer drying experimental results from the literature, and it was found that the simulated values of average moisture content of the grain had a maximum relative error of 7.73% compared to the experimental values. Furthermore, the impact of air temperature and relative humidity on drying was analyzed. The results showed that the heat and mass transfer coefficients of barley grains varied along the surface, the irregularity of the barley grains resulted in an asymmetric distribution of the surface heat transfer coefficient. Regions with lower porosity in the grain pile exhibited lower rates of heat and moisture transfer, particularly in the central area. Moisture transfer within the grain pile dominated the drying time compared to heat transfer. It was also observed that air temperature and relative humidity were the main variables influencing the drying rate of the grains. As the inlet air temperature increased from 45 to 70°C, the drying rate of the grain pile increased from 0.068% to 0.085%(d.b.)/min. Similarly, reducing the relative humidity from 40% to 18% resulted in an increase in the drying rate from 0.062% to 0.075%(d.b.)/min (within the first 10 min). Practical Applications This study employed numerical simulations to investigate the drying behavior of barley at both the particle scale and grain pile scale. The developed model was validated using experimental data from thin‐layer drying studies, confirming a significant agreement between the simulated and experimental values. Moreover, the study unveiled the impact of air temperature and relative humidity on the drying process. It was observed that regions with lower porosity within the grain pile experienced reduced rates of heat and moisture transfer. Notably, moisture transfer dominates the drying time. Additionally, the study emphasized the substantial influence of air temperature and relative humidity on the drying rates. These findings offer valuable insights for optimizing drying parameters, including air temperature and relative humidity, in order to enhance the efficiency and quality of the barley grain drying process.

Effect of temperature and velocity of superheated steam on initial condensation of distillers’ spent grain pellets during drying

Application of Two-Stage Variable Temperature Drying in Hot Air-Drying of Paddy Rice

Simulation and experimental study on the effect of deformation on heat and mass transfer in potato chips during superheated steam drying

Effect of Superheat Steam on Ejector in Distilled Water Preparation System for Medical Injection

Heat and mass transfer scale-up issues during freeze drying: II. Control and characterization of the degree of supercooling

Spatial variation of moisture content along the axial distance of corn at different superheated steam drying temperatures and various instantaneous times

Superheated steam drying and its applicability for various types of the dryer: The state of art

Effect on Rotation Speed on Thermal Dehydration Characteristics of Waste Gypsum Particles in a Constant Volume Rotary Vessel by Heating

Internal and surface temperature profiles of spherical biosolids particles during convective drying

Characteristics and Model of Sludge Adhesion During Thermal Drying.

Kinetics of Sludge Superheated Steam Drying and Optimization of Process Parameters

Numerical study of heat and mass transfer during drying process of barley grain piles based on the pore scale

Numerical Investigation of the Effect of Surface Wettability and Rotation on Condensation Heat Transfer in a Sludge Dryer Vertical Paddle

Low-Pressure Superheated Steam Drying—Vacuum Drying of a Porous Media and the Inversion Temperature

Effect of Vapor Condensation on Forced Convection Heat Transfer of Moistened Gas

Effects of Temperature and Granule Size on Sludge Drying Characteristics

Energy Requisite and Drying Capacity of a Superheated Steam Dryer

Experimental Investigation on Thermal Stratification Characteristic of Steam Condensation Through Multi-Hole Sparger

Effect of Thermophysical Properties on Coupled Heat and Mass Transfer in Porous Material during Forced Convective Drying

Tailoring Crystallization Kinetics in Thin Sucrose Films during Convective Drying: Impact of Temperature and Humidity on Onset, Growth, and Nucleation Rate

Effect of Substrate Conductivity on the Transient Thermal Transport of Hygroscopic Droplets during Vapor Absorption